1) static push-out test
静力推出试验
2) pseudo-static test
伪静力推覆试验
1.
Study on 3D-frame with special-shaped columns by pseudo-static test;
空间异形柱框架伪静力推覆试验研究
3) push-out test
推出试验
1.
Analysis on the behaviors of bond-slip between the shape steel and the concrete by push-out test;
型钢混凝土粘结滑移性能的推出试验及其分析(英文)
2.
The simulation analysis was carried out for shear stud push-out test by using ANSYS software.
采用有限元软件ANSYS对剪力钉推出试验进行了仿真分析,得出了与真实试验结果非常接近的荷载-滑移曲线,因而可用于实桥分析;在SAP2000软件中用弹簧单元模拟剪力钉,其刚度采用仿真推出试验所得值,对一实桥结构进行三维空间建模分析,得出在一些荷载作用下的结构响应,以比较考虑混凝土与钢箱界面滑移与否对曲线钢-混凝土箱形结合梁桥部分结构性能的影响。
3.
A series of push-out tests were conducted to study the bond mechanism, bond strength and bond-slip constitutive relations between section steel and concrete in SRC structures (steel reinforced concrete structures).
通过淹钢混凝土标准推出试验(push-outtest),对型钢混凝土粘结滑移受力机理、粘结强度和粘结滑移本构关系等关键问题进行研究。
4) static test
静力试验
1.
The software was used in the priority helicopter static test.
该软件已在某重点型号直升机全机静力试验中使用,结果表明这种软件的计算方法和数据精度满足了试验要求,取得了成功。
2.
Full scale aircraft static test is a very important process of aircraft design, it is costly and time consuming.
全尺寸飞机结构静力试验是飞机结构研制的重要环节,需大量的财力和时间投入。
3.
Based on the superposition principle of linear elasticity, a static model test method——single input, multiple output——was proposed for the static test of such structure.
基于弹性力学的线性叠加原理,针对多点承载桁架式卫星结构的静力试验,提出“单点加载,多点输出”的测试方法。
5) static experiment
静力试验
1.
The bearing performances and failure features of the prestressed steel reinforced concrete(PSRC)triangle brackets of the Chongqing International Edifice were investigated by the static experiments on two 1∶4 scale models.
通过对2榀比例为1∶4的结构模型室内静力试验,研究重庆国际大厦工程中预应力钢骨混凝土(prestressed steel reinforced concrete,PSRC)巨型三角形支托刚架的受力性能及破坏形态等设计问题。
2.
Based on the principle and method of dynamical model updating,this paper puts forward the static model updating based on exactitude static experimental data and some method based on design parameter and details how to identify the design parameter of reinforced concrete structures using least squares.
以动力模型修正的原理及方法为基础,提出用较精确的静力试验数据进行静力模型修正的概念,并详细介绍了利用最小二乘法对钢筋混凝土简支梁桥进行参数识别的静力模型修正方法。
3.
We get the measurement of the strain and the cable tension increment of the mast in different loading directions and loads in this static experiment.
文章根据我国荷载规范对风荷载计算的规定 ,应用风荷载最不利作用原理 ,模拟静风力在桅杆模型上几个最不利位置施加静荷载 ,在不同的加载方向、不同大小静荷载作用下进行静力试验 ,测出若干节点的应变情况及各纤绳张力的增量 ,分析其间的相互关系 ,得出了桅杆在静力荷载作用下的力学特性。
6) Push test
推力试验
补充资料：歼7飞机静力试验
歼7飞机静力试验
歼7飞机静力试验
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条