1) thermo-sensitive blending films
共混温敏膜
1.
Series of thermo-sensitive blending films are prepared from hydroxypropylcellulose and polyarcylonitrile.
采用羟丙基纤维素(Hydroxypropylcellulose,HPC)和聚丙烯腈(PAN)为原料制备了系列共混温敏膜;研究了原料配比、pH值以及温度对共混膜溶胀速率的影响。
3) blend temperature
共混温度
1.
The composites of woodfiber and LLDPE/PS alloy in different blend ratios and blend temperatures were prepared and the appearance quality and the mechanical and physical properties of the composites were evaluated also.
结果表明:不同共混比例与共混温度对制备的塑料合金熔体流动性、力学强度有较显著影响。
4) blended membrane
共混膜
1.
The blended membrane is prepared with Konjac glucomanna (KGM) and Carrageenan as materials.
结果表明,魔芋葡甘聚糖与卡拉胶用量比为6:4时,共混膜的能达到较好的效果。
2.
A series of blended membranes with various fullerene ethanolamine derivative contents were prepared using the natural polymer chitosan as membrane material by casting method.
通过溶液共混及流涎成膜法制备了一系列不同C60乙醇胺含量的壳聚糖共混膜,以及含Cu(Ⅱ)的C60乙醇胺/壳聚糖共混膜。
3.
The membranes were prepared by blending polyaniline with poly(vinylidene fluoride), and the gas-separation characteristics of pure PVDF membrane and blended membranes were investigated.
采用ＰＡＮＩ与ＰＶＤＦ共混制膜,并对共混膜和ＰＶＤＦ膜的气体分离性能进行对比研究。
5) blending membrane
共混膜
1.
Study of PES-PAN blending membrane;
聚醚砜-聚丙烯腈共混膜的研究
2.
Preparation of PES/CA blending membrane and its application in membrane bioreactor
聚醚砜/醋酸纤维素共混膜的制备及其在膜生物反应器中的应用研究
3.
The blending membranes of perfluorinated sulfonic resin with polyvinylidene fluoride(PVDF) were prepared by the method of solution casting.
为了降低质子交换膜的成本,选用聚偏氟乙烯和全氟磺酸树脂为原料,采用溶液-浇铸法制备了全氟磺酸树脂/聚偏氟乙烯的共混膜。
6) blend films
共混膜
1.
PP-g-MAH/down powder blend films with different content of powder were obtained after down powder were pretreated by different kinds of plasticizers,and the influence of down powder content,the type of PP,and the kind of plasticizers on the mechanical properties of blend films were studied.
采用不同增塑剂对羽绒粉体处理,制备了不同羽绒含量的马来酸酐接枝聚丙烯(PP-g-MAH)/羽绒粉体共混膜,分析了粉体含量、PP种类及不同增塑剂对共混膜力学性能的影响。
2.
The cassava starch-chitosan blend films were prepared by solution method.
以溶液共混法制备了木薯淀粉/壳聚糖共混膜,测试了其力学性能、水蒸气透过率、阻氧性及抗菌性能,同时通过红外光谱、X-射线、扫描电镜表征了其结构。
3.
PANI and Polystyrene were cosolved in xylene and casted into blend films.
将聚苯胺、聚苯乙烯共溶于二甲苯后制成共混膜,用广角X射线衍射、红外光谱、偏光显微镜分析了共混膜的相形态。
补充资料：共混
分子式：
CAS号：
性质：用炼胶机将不同橡胶或橡胶与塑料，均匀地混炼成胶料即称为共混。两种或多种橡胶并用，或橡胶与各种塑料并用，可大大扩展橡胶制品的用途，并显著提高橡胶制品的质量性能，还可改进胶料的工艺性能，降低橡胶的耗量和降低产品造价。不同橡胶或橡胶与塑料共混时，它们间应具有较好的相容性，或是利用最佳的配比，以有利于最大限度发挥共混的技术效果。
CAS号：
性质：用炼胶机将不同橡胶或橡胶与塑料，均匀地混炼成胶料即称为共混。两种或多种橡胶并用，或橡胶与各种塑料并用，可大大扩展橡胶制品的用途，并显著提高橡胶制品的质量性能，还可改进胶料的工艺性能，降低橡胶的耗量和降低产品造价。不同橡胶或橡胶与塑料共混时，它们间应具有较好的相容性，或是利用最佳的配比，以有利于最大限度发挥共混的技术效果。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条