1) elevated temperature creep forming
高温蠕变成形
2) creep
[英][kri:p] [美][krip]
高温蠕变
1.
MSP testing has been used to evaluate high-temperature mechanical properties of MoSi_2 based composites including high-temperature strength,brittle-to-ductile transition temperature and creep resistance.
对MoSi_2系复合材料高温蠕变测试表明,MSP试验法得到的蠕变曲线和传统方法类似,而且随着氧化物添加相含量的增加,复合材料的高温蠕变性能下降。
2.
Inorder to improve the poor high temperature creep resistant property of AZ91, the development of high temperature creep resistant die-casting magnesium alloys were carried out.
针对商用压铸镁合金抗高温蠕变性能较差的现状,开发了抗高温蠕变压铸镁合金,其开发的目的是针对大马力柴油发动机汽缸罩盖,其抗高温蠕变性能应该能够保障其在150℃条件下稳定工作,而且其成本的增加应该控制在AZ91D合金成本的15%以内。
3.
According to bad high temperature creep resistant property and on the base of AZ91,the development of high temperature creep resistant die-casting magnesium alloys were carried out in this paper.
针对商用压铸镁各金抗高温蠕变性能较差的现状,开发了抗高温蠕变压铸镁合金,其开发的目的是针对大马力柴油发动机汽缸罩盖,其抗高温蠕变性能应该能够保障其在150℃条件下稳定工作,而且其成本的增加应该控制在 AZ91D 合金成本的15%以内。
3) high temperature creep
高温蠕变
1.
Effect of zinc content on high temperature creep property of AZ31 magnesium alloy;
AZ31镁合金中Zn含量对其高温蠕变性能的影响
2.
Researches on the High Temperature Creep Deformation of the Weld Seam Interfaces of Pressure Vessels of Clad Steel Plates
复合钢板压力容器焊缝界面高温蠕变研究
3.
The research progress of the high temperature creep and creepmechanism of carbon/carbon composites and carbon fibres at home and abroad are reviewed in this paper.
综述了国内外对碳/碳复合材料及碳纤维的高温蠕变及蠕变机理的研究情况。
4) elevated temperature creep
高温蠕变
1.
The elevated temperature creep characteristics of composites and ZL109 alloy at different test temperatures and stresses were studied.
用加压铸造法制取Al2 O3 SiO2 系纤维增强ZL10 9合金复合材料 ,研究了在不同温度和不同试验应力下复合材料和ZL10 9合金的高温蠕变特性。
5) High temperature creep deformation
高温蠕变
1.
The high temperature creep deformation of certain material used in aerial engines lamina was detected by means of high temperature moire interferometry in this paper.
利用高温云纹干涉法对航空发动机叶片定向结晶材料的高温蠕变进行了测试，获得该材料不同主方向的高温蠕变性质和规律。
6) high_temperature creep
高温蠕变
1.
A calculating equation of high_temperature creep for three_point bending test was presented.
分析了原位生成含钛复相陶瓷TiB2 -TiC(TT) ,TiB2 -TiCxN1 -x(TTT)及TiB2 -TiC -SiC(TTS)的高温蠕变性能和高温氧化行为 。
2.
Several key models for high_temperature creep lifetime prediction of ceramics are introduced.
简要介绍了现有文献中报道的适用于估计陶瓷材料高温蠕变寿命的几种主要模型，针对它们的缺点，提出了估计陶瓷高温蠕变寿命的新思路，从数学上推算了１ 期、２ 期、３ 期蠕变发生的时间，提出了完整的蠕变寿命计算方法，对改进陶瓷高温蠕变寿命的估计方法作了理论上的探讨。
补充资料：高温
较高的温度，在不同的情况下所指的具体数值不同，例如在某些技术上指几千摄氏度以上，在工作场所指32摄氏度以上。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条