1) high-temperature corrosion
高温腐蚀;高温蠕变
2) high-temperature corrosion
高温腐蚀
1.
Investigations on outer thermal spraying and inner shot blasting on boiler tube to promote high-temperature corrosion resistance;
采用外壁喷涂与内壁喷丸方法提高锅炉高温受热面管抗高温腐蚀性能的试验
2.
The large amount of vanadium in Orimulsion may cause unexpected problems in the prevention of high-temperature corrosion of furnace.
奥里油中含钒量较多,是锅炉预防高温腐蚀设计中的大难题。
3.
The mechanism of high-temperature corrosion on water-wall of coal-fired boilers in thermal power plants has been briefly presented, and preventive countermeasures being put forward directing against different causes of high-temperature corrosion, the prevention technology of spraying corrosion-resistant metallic coatings onto surface of the water-wall being emphatically narrated.
简要介绍了火电厂燃煤锅炉水冷壁高温腐蚀机理,并针对不同的高温腐蚀原因提出了防护对策。
3) high temperature corrosion
高温腐蚀
1.
Study on high temperature corrosion resistance of FeCrAl and NiCr alloy coating;
FeCrAl和高镍铬合金涂层的抗高温腐蚀性能研究
2.
High Temperature Corrosion of Superheater Tube Materials in Pulverized Coal-Fired Environment;
粉煤燃烧环境中过热器管材的高温腐蚀
3.
Cause analysis of high temperature corrosion and precautionary measures for a 300MW boiler furnace;
燃煤锅炉炉膛高温腐蚀原因及对策
4) corrosion at high temperature
高温腐蚀
1.
This paper represents the mechanism of the water wall tube corrosion at high temperature and the principle of spraying Ni-Cr alloy anticorrosion coat , and introduces the characteristics of the high speed arc spraying and construction technology , at the same time also introduces the method of coat quality inspection.
初步阐述了水冷壁管高温腐蚀的机理及喷涂Ni-Cr合金防腐涂层的原理,介绍了高速电弧喷涂技术的特点、施工工艺,同时也介绍了涂层质量的检测方法。
5) creep
[英][kri:p] [美][krip]
高温蠕变
1.
MSP testing has been used to evaluate high-temperature mechanical properties of MoSi_2 based composites including high-temperature strength,brittle-to-ductile transition temperature and creep resistance.
对MoSi_2系复合材料高温蠕变测试表明,MSP试验法得到的蠕变曲线和传统方法类似,而且随着氧化物添加相含量的增加,复合材料的高温蠕变性能下降。
2.
Inorder to improve the poor high temperature creep resistant property of AZ91, the development of high temperature creep resistant die-casting magnesium alloys were carried out.
针对商用压铸镁合金抗高温蠕变性能较差的现状,开发了抗高温蠕变压铸镁合金,其开发的目的是针对大马力柴油发动机汽缸罩盖,其抗高温蠕变性能应该能够保障其在150℃条件下稳定工作,而且其成本的增加应该控制在AZ91D合金成本的15%以内。
3.
According to bad high temperature creep resistant property and on the base of AZ91,the development of high temperature creep resistant die-casting magnesium alloys were carried out in this paper.
针对商用压铸镁各金抗高温蠕变性能较差的现状,开发了抗高温蠕变压铸镁合金,其开发的目的是针对大马力柴油发动机汽缸罩盖,其抗高温蠕变性能应该能够保障其在150℃条件下稳定工作,而且其成本的增加应该控制在 AZ91D 合金成本的15%以内。
6) high temperature creep
高温蠕变
1.
Effect of zinc content on high temperature creep property of AZ31 magnesium alloy;
AZ31镁合金中Zn含量对其高温蠕变性能的影响
2.
Researches on the High Temperature Creep Deformation of the Weld Seam Interfaces of Pressure Vessels of Clad Steel Plates
复合钢板压力容器焊缝界面高温蠕变研究
3.
The research progress of the high temperature creep and creepmechanism of carbon/carbon composites and carbon fibres at home and abroad are reviewed in this paper.
综述了国内外对碳/碳复合材料及碳纤维的高温蠕变及蠕变机理的研究情况。
补充资料：高温腐蚀
分子式：
CAS号：
性质： 金属材料在高温下与环境气氛中的氧、硫、碳、氮等元素发生化学或电化学反应而导致的变质或破坏。高温腐蚀并无严格的温度界限，通常认为，当金属工作温度达到其熔点(绝对温标)的0.3～0.4以上时，就可认为是高温腐蚀环境。在石油化工、能源、动力、冶金、航空航天等领域普遍存在高温腐蚀问题，针对不同的高温腐蚀环境可以采用不同类型材料，或采用耐高温腐蚀涂层进行防护。
CAS号：
性质： 金属材料在高温下与环境气氛中的氧、硫、碳、氮等元素发生化学或电化学反应而导致的变质或破坏。高温腐蚀并无严格的温度界限，通常认为，当金属工作温度达到其熔点(绝对温标)的0.3～0.4以上时，就可认为是高温腐蚀环境。在石油化工、能源、动力、冶金、航空航天等领域普遍存在高温腐蚀问题，针对不同的高温腐蚀环境可以采用不同类型材料，或采用耐高温腐蚀涂层进行防护。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条