1) transition temperature
转脆温度
2) ductile-brittle transition temperature
韧脆转变温度
1.
Determination of ductile-brittle transition temperature of DIWA353 steel plate for boiler and pressure vessel;
锅炉压力容器DIWA353钢板韧脆转变温度的测定
2.
On the method of data processing for ductile-brittle transition temperature;
材料韧脆转变温度数据处理方法探讨
3.
The experimental results showed that the yield strength of pipeline steel X80 with 16mm wall thickness can be up to over 670 MPa through controlled rolling/cooling,and the ratio of tensile strength to yield strength and ductile-brittle transition temperature are lower than 0.
85,韧脆转变温度低于-60℃,达到了很好的强韧性匹配。
3) brittle transition temperature
脆性转变温度
1.
Series impact tests were carried out to measure the series impact work done to a 400?MPaclass supersteel which was supplied through controlled rolling and cooling rate accelerated with trace element Nb contained, thus giving a brittle transition temperature curve.
以微Nb处理控轧控冷工艺生产的400MPa级超级钢为研究对象,采用"系列冲击实验法"测定系列冲击功,绘制出脆性转变温度曲线·按综合能量法及断口形貌,确定出脆性转变温度为-80℃,并与相同化学成分、普通方法生产的钢板的脆性转变温度加以比较,对这一温度降低的原因进行了分析·分析结果认为,脆性转变温度降低、低温韧性的改善是化学成分、微观组织、轧制工艺综合作用的结果·钢中S、P、Si含量低有利于脆性转变温度的降低、微量Nb的存在有利于脆性转变温度的降低;晶粒细化,亚晶强化是试验钢脆性转变温度降低的组织原因;控轧控冷工艺的采用是降低脆性转变温度的工艺因素
2.
Based on the character of ductile-brittle transition temperature curve, Boltzmann function was proposed to depict the relationship of impact absorbing energy with temperature deterministically and quantitatively.
试验数据的回归分析表明 ,该方法获取的回归曲线具有较高相关系数 ,并能较准确地求取材料脆性转变温度vTr5 4 。
3.
Charpy brittle transition temperature was studied and the mechanical properties and fracture toughness were tested at room temperature and working iemperaiure for 11/4Cr-1/2Mo steel, which has been used in hydrogen with partial pressure 4.
55MPa氢分压下使用12万小时的1 1/4Cr-1/2Mo钢进行了室温及使用温度的力学性能,断裂韧性和夏比冲击功的脆性转变温度的试验研究。
4) FATT
脆性转变温度
1.
The paper studies the facture appearance transition temperature(FATT)of SA335P91/12CrMoV dissimilar steel welding metal.
本课题对异种钢焊接SA335P91/12Cr1MoV的焊缝金属脆性转变温度进行了研究,通过高、中、低3种不同匹配的焊缝金属夏比缺口冲击试验数据的计算及分析,得出SA335P91/12Cr1MoV异种钢3种匹配的焊接接头焊缝金属的脆性转变温度分别为低匹配78℃、中匹配79℃、高匹配91℃。
5) Ductile-brittle transition temperature
韧-脆转变温度
1.
The ductile-brittle transition temperature,chemical composition,microstructure and fracture of welded metal are investigated to discuss the difference of impact absorbed energy between butt weld and deposited metal.
针对对接焊缝金属和熔敷金属之间的冲击吸收功差异,分别从材料的韧-脆转变温度、成分、组织以及断口方面进行了探讨。
6) Ductile Brittle Transition Temperature
脆性转化温度
补充资料：脆脆小黑豆
脆脆小黑豆
材料：绿心黑豆，盐，糖，肉桂粉
做法：超级简单哦~~把绿心黑豆泡水4个小时，等豆豆胀大，沥干水分，放到小盒子里，加入盐，糖，肉桂粉，然后盖上盖子，甩甩甩，摇摇摇，让味道均匀裹在豆豆表面，接着，把豆豆平铺在盘子里，放到微波炉中，中火开5分钟后拿出，搅拌下，再平铺开，放入微波炉中，中火开3分钟后取出，放凉即可。
小贴士：
豆豆放到盘子当中一定要平铺，不然容易焦掉，而且烤的程度不均匀。
也可以把绿心黑豆换成去皮花生之类的~~黄豆我也试过，不过奇怪的是没有黑豆那么脆，有点软。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。