1) clad layer
覆(复)层,堆焊层
2) deposition welding of the cladding
覆盖层堆焊
4) deposited adhesive layer
堆覆胶层
5) hardfacing layer
堆焊层
1.
Application of artificial neural network technology to predicting chemical composition of cast steel hardfacing layer;
铸钢件耐磨堆焊层人工神经网络成分预测
2.
The effect of heating temperature and thermal-cold recycle times on the hardness of mult-elemental Fe-based hardfacing layer was studied.
研究了热循环温度和循环次数对多元合金铁基堆焊层硬度的影响。
3.
The effect regularity of different carbon contents on the post-weld hardness and aging hardness and microstructures of hardfacing layer of coated electrode with C Cr Mo W V Nb alloy system are systematically explored.
系统地探讨了不同碳含量对 C- Cr- Mo- W- V- Nb合金系堆焊焊条堆焊层焊态下和时效处理后的硬度及组织的影响规律。
6) surfacing layer
堆焊层
1.
Study of surfacing layer thickness for valve seat;
阀门密封面堆焊层厚度的研究
2.
Under 900℃,heat treatment of different heat preservation time on duplex stainless steel surfacing layer was carried on,and different content ofσ-phase was created.
对双相不锈钢堆焊层进行900℃下不同保温时间的热处理,使其产生不同σ相含量的组织。
3.
The microstructure,hardness and wear resistance of high carbon and chromium content surfacing layer heat-treaded by different process were investigated in this paper.
研究了高碳高铬铸铁型硬质合金堆焊层在不同热处理工艺条件下的组织、硬度与耐磨性。
补充资料:覆胶
分子式:
CAS号:
性质:在织物上覆盖橡胶层的工艺叫做覆胶。例如用压延机给帘布或帆布贴压上薄胶层或是擦压上胶层。用涂胶机也可把胶浆涂进织物挂上胶层,也属覆胶。各种覆胶都要求胶与织物密着良好,填满织物的空隙,胶层厚度精确而均整。
CAS号:
性质:在织物上覆盖橡胶层的工艺叫做覆胶。例如用压延机给帘布或帆布贴压上薄胶层或是擦压上胶层。用涂胶机也可把胶浆涂进织物挂上胶层,也属覆胶。各种覆胶都要求胶与织物密着良好,填满织物的空隙,胶层厚度精确而均整。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条