1) buttered weld
隔离(堆)焊层，(缓冲)堆焊层
3) buttering
[英]['bʌtə] [美]['bʌtɚ]
预堆边焊;涂灰浆;隔离层
4) hardfacing layer
堆焊层
1.
Application of artificial neural network technology to predicting chemical composition of cast steel hardfacing layer;
铸钢件耐磨堆焊层人工神经网络成分预测
2.
The effect of heating temperature and thermal-cold recycle times on the hardness of mult-elemental Fe-based hardfacing layer was studied.
研究了热循环温度和循环次数对多元合金铁基堆焊层硬度的影响。
3.
The effect regularity of different carbon contents on the post-weld hardness and aging hardness and microstructures of hardfacing layer of coated electrode with C Cr Mo W V Nb alloy system are systematically explored.
系统地探讨了不同碳含量对 C- Cr- Mo- W- V- Nb合金系堆焊焊条堆焊层焊态下和时效处理后的硬度及组织的影响规律。
5) surfacing layer
堆焊层
1.
Study of surfacing layer thickness for valve seat;
阀门密封面堆焊层厚度的研究
2.
Under 900℃,heat treatment of different heat preservation time on duplex stainless steel surfacing layer was carried on,and different content ofσ-phase was created.
对双相不锈钢堆焊层进行900℃下不同保温时间的热处理,使其产生不同σ相含量的组织。
3.
The microstructure,hardness and wear resistance of high carbon and chromium content surfacing layer heat-treaded by different process were investigated in this paper.
研究了高碳高铬铸铁型硬质合金堆焊层在不同热处理工艺条件下的组织、硬度与耐磨性。
6) weld overlay cladding
堆焊层
1.
Effect of hydrogen on mechanical properties and failure morphology for stainless steel weld overlay cladding;
氢对不锈钢堆焊层的力学性能和断裂形貌的影响
2.
The characteristics of hydrogen damages for hydrogenation reactor wall-materials,which include the structure material of 2(1/4)Cr-1Mo and the weld overlay cladding of 309L and 347L,in original and hydrogen charged had been investigated.
研究了在模拟加氢反应器工况条件下 ,国产加氢反应器壁材料 [2 (1/ 4 )Cr - 1Mo及其上的 30 9L和 347L不锈钢堆焊层 ]的氢损伤特性 。
补充资料：隔离
| 隔离 isolation 为避免传染病病人传染他人，而将病人与其他人隔开的措施。一般根据各种疾病传染性的大小和传播途径的不同，而采取不同的隔离措施。对于传染性极强的烈性传染病如霍乱等，采取严格隔离；对于呼吸道传染病如白喉等，采取呼吸道隔离；对于消化道传染病如痢疾，采取消化道隔离或床边隔离；对于接触传播的疾病如皮肤炭疽，采取接触隔离；对于昆虫传播的疾病如疟疾等，采取虫媒隔离等等。隔离时间的长短应根据该种传染病的最长传染期而定。原则上是以病人没有传染性不能再传染他人为度。除传染病病人外，接触传染病病人的接触者也应隔离观察，称为留验。留验期间如接触者发病则应立即隔离、治疗。若接触者未发病，观察期满即可解除隔离。观察期应按该种传染病的最长潜伏期计算。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条