1.
Analysis on Causes of Peeling and Cracking of Surfacing Welding Layer of Hydrocracking Reactor
加氢裂化反应器堆焊层剥离和开裂原因分析
2.
Development of buttering materials for surfacing and repairing adamite rolls
半钢轧辊堆焊修复用隔离层材料的研制
3.
The loss of C,B,Si,Cr and other elements in coatings decreases in the order of plasma,autogenous and faradic spraying.
焊层中的C、B、si、Cr等元素烧损率以等离子堆焊最大,火焰喷焊重熔次之,感应熔焊最小;
4.
Effect of Welding Process on Microstructure and Properties of Surfacing Layer with D212 Welding Electrode
D212焊条堆焊工艺对堆焊层组织性能的影响
5.
The Synthesis In-situ of Metal-ceramic Coatings Containing ZrB_2 by PTA
等离子弧堆焊条件下ZrB_2陶瓷涂层的原位合成技术的探索
6.
Microstructure and wear resistance of metal-based ceramics composite coating deposited by plasma arc surfacing
金属基陶瓷复合等离子弧堆焊层组织与耐磨性能
7.
The technology requirements and characteristics of overlay of a refractory steel build-up welding wire are introduced.
介绍了一种热强钢堆焊焊条的堆焊工艺要求、焊层特性。
8.
Study on Strip Surfacing Technologies and Mechanical and Property of Surfacing Deposit for 2.25Cr1Mo Steel;
2.25CrlMo钢带极堆焊工艺及堆焊层组织、性能研究
9.
Study on the Overlaying Property and Hot Corrosion Resistance of Fe_3Al Alloy Overlayer;
Fe_3Al合金堆焊及堆焊层的耐热腐蚀性能研究
10.
Research on Corrosion Resistance of Overlaying Welding Layer Using A102,A132 and A302 Stainless Steel Electrode
A102、A132和A302焊条堆焊层耐蚀性研究
11.
sprayable and strippable protective plastic coatings
塑料防剥离用喷射涂层剥取
12.
Preperation of Stripper for Removing Solder from Waste Printed Circuit Boards
废旧电路板上残留焊锡剥离液的研制
13.
The Influence of Carbon Content on the Hardness and Microstructure of Layer on Weld Deposit Rob with Multi-elements Alloying System
碳含量对多元合金系堆焊焊条堆焊层硬度的影响
14.
Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.
等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。
15.
Research on Microstructure and Property of Flux-cored Welding Wire Wear-resistant Overlay
药芯焊丝堆焊耐磨覆层组织性能试验研究
16.
Cracking Analysis of Arc Hardfacing Layer of Bainite Steel Frog
贝氏体钢辙叉电弧堆焊层的开裂分析
17.
Characteristic Analysis on Fe-Cr-C-Mo Hardfacing Alloy Layer
Fe-Cr-C-Mo堆焊合金层的特征分析
18.
Fabrication and characterization of nanocrystructured surface layer of J507 weld by ultrasonic impact peening
J507堆焊层超声冲击表面纳米化