1) weldability
可焊性，焊接性能
2) Weldability
可焊接性
3) welding performance
焊接性能
1.
Influence of sintering process on the cutting and welding performance of diamond saw blade;
烧结工艺对金刚石锯片切割性能和焊接性能的影响
2.
Experimental Researches on the Welding Performance 9%Ni Steel of China
国产9%Ni钢焊接性能的试验研究
3.
Analyzes the welding characteristic of importing new type of SA213- T23 steel, tests the welding technique of small diameter pipe, takes further understanding for the steel welding performance.
分析了我国新引进的钢种SA213-T23钢的焊接性能,并对其小径管的焊接工艺进行了试验,对该钢种的焊接性能有了进一步的了解和认识。
4) welding characteristic
焊接性能
1.
Effect of waveform control parameters on GMAW welding characteristic;
波控参数对GMAW焊接性能的影响
2.
Based on the analysis of influencing factor of gas metal arc welding(GMAW) characteristic, a DSP(digital signal process) based whole digital parallel double closed-loop control system was established to adjust the electrical parameter during the “short” phase and “arc” phase separately, in order to improve GMAW welding characteristic by modulating the current waveform of short time and arc time.
实验结果表明,采用该方式控制的波控数字式GMAW焊接电源,在焊接性能上与普通平特性逆变焊接电源相比有较大的提高,飞溅减小、焊接过程稳定、焊缝成形好,更加适合GMAW短路过渡焊。
3.
Welding characteristic of Fuzzy wave controlled CO 2 welding power source and constant voltage power source with eletrical reactor are compared.
本文介绍了CO2 焊模糊波控逆变电源的原理 ,对其焊接性能与带电子电抗器的平特性逆变电源作了对比研究。
5) welding property
焊接性能
1.
Mechanics property and welding property of 16MnDR steel plate;
16MnDR钢板力学性能及焊接性能试验研究
2.
Experimental study on welding property of cold-formed steel members
冷弯型钢焊接性能试验研究
3.
Ti40 alloy welding property was studied and its welding texture was analyzed by using metallography and SEM methods.
研究新型阻燃钛合金Ti40合金的TIG(tungest inert gas)焊焊接性能,采用金相、SEM等方法分析Ti40合金焊缝及热影响区的组织变化。
6) weldability
焊接性能
1.
Study on the weldability and welding materials of fire and weathering resistant steel;
耐火耐候钢焊接性能及焊接材料的研究
2.
Effects of O section profile on weldability of self-shielded flux cored wire;
0型截面外形对自保护药芯焊丝焊接性能的影响
3.
Research on the Mechanical Behavior & Weldability ofHigh Performance Fire-resistant and WeatheringConstruction Steel and its Typical Use;
高性能耐火耐候建筑用钢的力学性能和焊接性能及其典型应用研究
补充资料：可焊性
分子式：
CAS号：
性质：金属材料在一定的焊接工艺条件下，通过焊接形成优质接头的可能性。如低碳钢含碳量较低、塑性较好，一般情况下没有淬硬倾向，故焊接性能很好，不需采用特殊工艺措施，可用各种焊接方法施焊，而获得高质量的焊接接头，因此低碳钢是可焊性很好的材料。普通低合金钢比低碳钢强度大，但塑性和韧性并不低，它也是一种可焊性较好的材料。
CAS号：
性质：金属材料在一定的焊接工艺条件下，通过焊接形成优质接头的可能性。如低碳钢含碳量较低、塑性较好，一般情况下没有淬硬倾向，故焊接性能很好，不需采用特殊工艺措施，可用各种焊接方法施焊，而获得高质量的焊接接头，因此低碳钢是可焊性很好的材料。普通低合金钢比低碳钢强度大，但塑性和韧性并不低，它也是一种可焊性较好的材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条