1) magnetic valve
电磁阀，磁阀
2) solenoid valve spool
电磁阀滑阀
3) electromagnetic valve
电磁阀
1.
Analysis of Performance Parameters of Electronic Jacqard's Electromagnetic Valve;
电子提花机用电磁阀若干性能参数分析
2.
Maintenance of electromagnetic valve in combustion control system of heat medium heater;
热媒炉燃烧控制系统电磁阀的维护
3.
Development of PN40 DN32 pilot operated high pressure air electromagnetic valve;
PN40 DN32先导式高压空气电磁阀的研制
4) magnetic valve
电磁阀
1.
The operating principle and steering control tube of high-temperature air generator are introduced, the reasons for high resistance of the steering control tube being composed of 4 magnetic valves are analyzed, and the improvement on substitution of 1 four-way valve for 4 magnetic valves is put forward.
介绍了高温空气发生器的工作原理及换向控制管路,分析了由4个电磁阀组成的换向控制管路阻力大的原因,提出由1个四通阀代替4个电磁阀的改造措施。
2.
The system of magnetic valve controller based on GSM model has some merits such as flexibly and conveniently,low investment and low running expenses,it provides a kind of pro-environment and power frugal feasible program for magnetic valve controller to have core competitiveness.
基于GSM短消息的电磁阀遥控控制系统具有灵活方便、投资少、运行费用低等优点,为阀门控制业拥有核心竞争力提供了一种环保、节能的可行方案。
5) Solenoid valve
电磁阀
1.
Process of black phosphating of solenoid valve;
电磁阀本体黑色磷化工艺
2.
Design of solenoid valve performance tester;
电磁阀特性测试仪的设计
3.
Mechanism analysis of double-peak release current curve of solenoid valve;
电磁阀释放电流出现双波峰的机理分析
6) electromagnetism valve
电磁阀
1.
This paper introduces the research arm of automatism check and measure and isolation and give an alarm system, to confirm the technology project, to solve the linchpin technology, and go deep into research and experiment to actualize automatism check and measure and isolation and give an alarm to electromagnetism valve with malfunction from theory and technology.
本文介绍了可控减速顶电磁阀故障自动检测,隔离报警系统的研究目的、技术方案的确定以及关键技术的解决,从理论上、技术上对实现故障电磁阀的检测及自动隔离进行了深入研究和实验。
2.
In the end we control the electromagnetism valve by switching signal with u-sing PLC and achieve the intention that we can use the exterior circuitry to automatically transport in electricity.
电气部分用开关信号通过PLC来控制电磁阀,并运用外部线路来达到自动输送计量的目的。
3.
this paper tells the function of electromagnetism valve of controllable retarder.
对可控顶电磁阀的功能进行论述,并着重介绍如何解决可控顶电磁阀线圈在现场使用的问
补充资料：电磁阀
依靠供电线圈产生的电磁力驱动活动铁芯使阀瓣启闭的阀门。通电前，阀门处于常闭（或常开）状态，通电后电磁力驱动活动铁芯，使阀门立即开启（或关闭）。电磁阀的特点是动作迅速、结构简单、操作简便。它主要用于自动截断、接通或切换流体流向。因电磁力和活动铁芯的动作行程都较小，这种阀门的公称通径一般不超过80毫米。电磁阀有多种结构，一般分为无填料型和有填料型两类（见图）。无填料型电磁阀不用填料密封，套管内充满流体，除适用于一般流体外，更适用于氦、氟利昂（见制冷剂）和氨等贵重或有毒流体。有填料型电磁阀因使用填料，流体不与套管和铁芯等接触，大多用于高温、低温或强腐蚀性流体，但因有填料函，体积较大，且增加阀杆运动的摩擦力，故应用较少。电磁阀的电源有交流、直流之分。用交流电的电磁阀的动作特别快，但易发热、启闭力较小。用直流电的电磁阀不易发热，启闭力较大，但动作没有交流的快。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条