1) electrom agnetic lightvalve
电磁光阀
1.
Because ofsome uncertainty ofelectrom agnetic lightvalves, in order to raise the frequency ofthe valve in certain basicstructureby adjusting the param eters ofdrive cur- rent, w e observed the status ofthe valve in variouscontrollable param eters through ex- periments.
提出了一种自适应高速脉冲式电磁光阀。
2) magnetic valve
电磁阀,磁阀
3) solenoid valve spool
电磁阀滑阀
4) electromagnetic valve
电磁阀
1.
Analysis of Performance Parameters of Electronic Jacqard's Electromagnetic Valve;
电子提花机用电磁阀若干性能参数分析
2.
Maintenance of electromagnetic valve in combustion control system of heat medium heater;
热媒炉燃烧控制系统电磁阀的维护
3.
Development of PN40 DN32 pilot operated high pressure air electromagnetic valve;
PN40 DN32先导式高压空气电磁阀的研制
5) magnetic valve
电磁阀
1.
The operating principle and steering control tube of high-temperature air generator are introduced, the reasons for high resistance of the steering control tube being composed of 4 magnetic valves are analyzed, and the improvement on substitution of 1 four-way valve for 4 magnetic valves is put forward.
介绍了高温空气发生器的工作原理及换向控制管路,分析了由4个电磁阀组成的换向控制管路阻力大的原因,提出由1个四通阀代替4个电磁阀的改造措施。
2.
The system of magnetic valve controller based on GSM model has some merits such as flexibly and conveniently,low investment and low running expenses,it provides a kind of pro-environment and power frugal feasible program for magnetic valve controller to have core competitiveness.
基于GSM短消息的电磁阀遥控控制系统具有灵活方便、投资少、运行费用低等优点,为阀门控制业拥有核心竞争力提供了一种环保、节能的可行方案。
6) Solenoid valve
电磁阀
1.
Process of black phosphating of solenoid valve;
电磁阀本体黑色磷化工艺
2.
Design of solenoid valve performance tester;
电磁阀特性测试仪的设计
3.
Mechanism analysis of double-peak release current curve of solenoid valve;
电磁阀释放电流出现双波峰的机理分析
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀 | 减压阀 | 顺序阀 | ||
控制油路的特点 | 通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0 | 通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定 | 直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力 | |
出油口情况 | 出油口与油箱相连 | 出油口与减压回路相连 | 出油口与工作回路相连 | |
泄漏形式 | 内泄式 | 外泄式 | 内泄式 | |
进油口状态及压力值 | 常态 | 常闭(原始状态) | 常开(原始状态) | 常闭(原始状态) |
工作状态 | 进出油口相通,进油口压力为调整压力 | 进油口压力低于出油口压力,出油口压力稳定在调定值上 | 进出油口相通,进油口压力允许继续升高 | |
联接方式 | 并联 | 串联 | 实现顺序动作式串联作卸荷阀用时并联 | |
功用 | 定压、溢流或安全作用限压、稳压、保压 | 减压、稳压 | 不控制系统的压力,只利用系统的压力变化控制油路的通断 | |
进油腔压力p1控制阀芯移动 | 出油腔压力p2控制阀芯移动 | 进油腔压力p1控制阀芯移动 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条