1) carboxyl-terminated NBR
端羧基丁苯胶
2) modified styrene butadiene dispersion
羧基丁苯胶
1.
Study on damping of cement concrete mixing modified styrene butadiene dispersion;
羧基丁苯胶水泥混凝土阻尼值的探索性研究
3) carboxyl-terminated butadiene-acrylonitrile copolymer
端羧基丁腈像胶
4) CTBN
端羧基丁腈橡胶
1.
Curing Process and Properties of BCE/CTBN Blends;
双酚A型氰酸酯/端羧基丁腈橡胶共混物的制备工艺和性能
2.
Pre-reaction mechanism of epoxy resin(EP) and CTBN was verified by FT-IR,it was reason that the hydroxyl was formed by esterification reactions between carboxyl and epoxy group.
利用红外光谱确认了环氧树脂(EP)与端羧基丁腈橡胶(CTBN)的预聚反应机理是-COOH与环氧基进行酯化反应生成-OH基团,其最佳反应条件是70℃、3 h。
3.
In the room temperature,a modified epoxy resin(I) prepared from CTBN and epoxy resin AG-80 was mixed proportionately as component A,with the modified epoxy resin(II) from the reaction between silicon-boron resin and bisphenol-A epoxy resin.
用端羧基丁腈橡胶(CTBN)与环氧树脂AG-80反应制得改性环氧树脂(I);以硅硼树脂与双酚A型环氧树脂反应得到改性环氧树脂(Ⅱ);将改性环氧树脂(I)和(II)按比例在室温下充分混匀为A组分,把固化剂、阻燃剂等混配成B组分,将A和B组分按不同配比均匀混合配成灌封材料,并以IR、拉力机等仪器分别对改性树脂、灌封材料进行结构及力学性能的测试表征。
5) carboxylated styrene butadiene rubber
羧基丁苯橡胶
1.
In this dissertation the effects of AT and bis (3-triethoxysilylpropyl) tetrasulfide (Si69) on the structure and properties of carboxylated styrene butadiene rubber (CSBR) and butadiene rubber (BR) were studied.
本文研究了凹凸棒土在羧基丁苯橡胶(CSBR)及顺丁橡胶(BR)改性中的应用,以及双-[γ-(三乙氧基硅)丙基]-四硫化物(Si69)对复合材料性能的影响。
6) carboxylated styrene butadiene latex
羧基丁苯胶乳
1.
Nylon short fiber grafted rubber composites was prepared when short fiber pretreated with γ -methacryloxy propyl trimethoxy silane(A 174) or γ -amino propyl triethoxy silane(A 1100) was soaked in carboxylated styrene butadiene latex for 10 min , then was kept in an oven at 110 ℃ for 90 min .
将用γ-(甲基丙烯酰氧基)丙基三甲氧基硅烷(A174)或γ-氨丙基三乙氧基硅烷(A1100)处理后的尼龙短纤维分别加入到特软羧基丁苯胶乳中,浸泡10min后于110℃烘箱中干燥90min,可制备尼龙短纤维接枝橡胶复合材料。
2.
Two methods were used to analyze the distribution of carboxylated styrene butadiene latex in the coating layer,one is energy dispersive X ray spectrometer,the other is backscattered electron(BSE) imaging after treating the sample by standard metallographic techniques.
运用两种方法对经溴标记的涂布纸中羧基丁苯胶乳在涂层内的分布进行了检测。
补充资料：羧基丁苯胶乳胶黏剂
分子式：
CAS号：
性质：以丁二烯、苯乙烯和少量不饱和羧酸(如丙烯酸或甲基丙烯酸等)乳液聚合的胶乳为基体的橡胶胶黏剂。胶接性能和施工性能良好。用于无纺布、纸张等材料的胶接，并作为服装、地毯的衬里。
CAS号：
性质：以丁二烯、苯乙烯和少量不饱和羧酸(如丙烯酸或甲基丙烯酸等)乳液聚合的胶乳为基体的橡胶胶黏剂。胶接性能和施工性能良好。用于无纺布、纸张等材料的胶接，并作为服装、地毯的衬里。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条