1)  roll guides and guards
轧辊导卫装置
2)  roll
轧辊
1.
Practice on equal proportional laser treatment of section steel rolls;
型钢轧辊等比例激光表面强化技术与实践
2.
Process of crater formation upon electric discharge textured roll surface;
EDT毛化轧辊表面凹坑形成过程
3.
Analysis and countermeasure for fracture forms of rolls in hot rolling section steel;
热轧型钢轧辊的断裂行为分析及对策
3)  roller
轧辊
1.
Checking the Roller Strength in Rolling Machine for Vane;
叶片专用辊轧机轧辊的强度校核
2.
Wearable cladding repair craftwork of cold roller;
冷轧辊耐磨堆焊修复工艺
3.
Pulse Electrochemical Finishing with a Shaped Cathode and Its Application on Roller;
成型阴极脉冲电化学光整加工在轧辊上的应用
4)  rolls
轧辊
1.
A projection of advanced three times pouring two times compounding is used to resolve the technical problem of the low tensile strength in the compound layer and core of high chromium compound cast iron rolls.
采用先进的三次浇注二次复合的轧辊生产工艺,解决了高铬复合铸铁轧辊结合层及芯部强度低的技术难题;采用先进的成分设计,对外层材质及中间层材质进行有效的变质处理,材料的强度、韧性及耐磨性得到提高;对轧辊进行高温淬火和二次回火热处理,成功地获得了高的辊身硬度及低的残余奥氏体含量。
2.
To exploit the high performance roll is the target that the roll researchers are searching for because the quality of rolls directly affects the output and quality of the rolling material.
轧辊的质量直接关系到轧材的产量和质量,开发高性能轧辊是轧辊研制者不断努力的目标。
3.
The characteristic of the high-speed stssl rolls is described in the article.
介绍了高速钢轧辊特性;对比分析了高速钢与高铬铁轧辊在热凸度、摩擦系数、氧化膜特征、抗事故性等方面的区别;结合邯钢CSP生产线实际,论述了高速钢轧辊在使用和轧辊修磨及探伤方面的技术、经验和注意事项。
5)  mill roller
轧辊
1.
Lubrication gradient material (LGM) and its process on tungsten carbon was developed,and the wire rod mill rollers of the LGM were served in metallurgy industry.
介绍了经低温离子渗硫处理的冷硬铸铁及冷硬合金铸铁轧辊。
6)  roller dtructure
轧辊结构
参考词条
补充资料:导卫装置


导卫装置
guides and guards

daowei zhuangzhi导卫装置(guides and guards)在型材轧制过程中引导轧件按所需要的状态进出孔型,以保证轧件实现既定的变形的装置(也叫诱导装置或轧辊辅件)。不论轧制任何断面的型材,几乎在所有孔型的入口和出口都要使用导卫装置。导卫装置的设计和使用是否得当,直接影响到产品的质量和轧机的生产能力。尽管孔型设计合理,如果导卫装置的设计或使用不当,也不能轧出合格的成品,并可能造成刮切轧件、挤钢、缠辊,甚至造成断辊或更严重的设备事故和人身事故。导卫装置设计和调整得好,有时还能弥补孔型设计的不足,如轧制角钢和槽钢时,若边长不合格,可用导卫装置来调整。导卫装置通常包括横梁、导板、卫板、夹板、导板箱、托板、扭转导板、扭转辊、围盘、导管和其他诱导、夹持轧件或使轧件在孔型以外产生既定变形和扭转等的各种装置。 (成友义)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。