1) cone breaker
圆锥形破碎机
2) conus medullaris
圆锥
1.
Aim: To study the diagnosis and treatment of ependymoma in conus medullaris and cauda equins.
目的:探讨圆锥马尾部室管膜瘤的诊断及手术治疗特点。
2.
Objective To explore the clinical features and surgical findings of cauda equina and conus medullaris tumors.
①目的 探讨马尾圆锥肿瘤的临床及手术特点。
3) cone
圆锥
1.
A way of calculating the intersecting line of cylinder and cone with the aid of supplementary plane;
借助特定辅助平面求圆柱圆锥相贯线的方法
2.
Diagraming the characteristic points on the intersection lines between a sphere and a cone by means of the method of anxiliary sphere;
用辅助球面法求圆球和圆锥相贯线上特殊点
4) circular cone
圆锥
1.
Solution of obliquely intersection-line of cylinder and circular cone;
圆柱与圆锥偏斜交相贯线求法的研究
2.
The Spreading Picture Drawing of the Cylinder and Circular Cone Intersected in the Axial;
相交圆柱与圆锥表面展开图的计算机绘制
3.
The spherical method and auxiliary plane method are usually apply in making up the intersection line, while cylinder and circular cone intersect each other diagonally.
求作圆柱面与圆锥面轴线斜交时的相贯线 ,通常用的作图方法是球面法或辅助平面法。
5) tapered roller
圆锥滚子
1.
Discussion on machining technology for spherical fiducial surface of tapered roller;
圆锥滚子球基面加工工艺的探讨
2.
Study of generatrix shape of tapered roller processed with centerless grinding;
圆锥滚子无心磨削母线形状的探讨
3.
Improvement of regulation wheel guiding surface during tapered rollers outer surface grinding;
圆锥滚子外径表面磨削时导轮制导面的改进
6) taper ferrule
圆锥套圈
1.
Taking the cold rolling with the series of 2BD for ISO355 taper ferrule as the example,the method of the pair closed type rolling was used to reduce the spread of the product and to obtain a good surface.
以ISO355系列2BD圆锥套圈冷辗扩为例,采用成对闭式辗扩的方式,以达到减小成品宽展和形成良好端面的目的。
参考词条
补充资料：笼形破碎机
笼形破碎机
cage crusher
}ongxl门9 Posu}宜.笼形破碎机(c age crusher)由两个相向高速转动的转笼，对物料进行多次冲击使之破碎到一定粒度的破碎机。适用于干燥的粘土块、硅藻土、白奎、石棉矿、煤、沥青等软物料的细碎。转笼由带有数圈钢棒的圆盘组成。两个转笼的钢棒圈互相交错布置，形成破碎腔。最外圈钢棒的周速为22~37m/s。笼形破碎机的规格以其工作圆盘直径x转笼宽度(mm)表示。如拟()0。只29。笼形破碎机，其工作圆盘直径为l000mm，转笼宽度为29omm。每个转笼的机轴通过单独的电动机，经传动装置驱动。笼形破碎机工作时，物料由给料口给入破碎机中心部分(笼内)，散开后落入钢棒运动一越缄! 笼形破碎机 l一轴;2一加料斗;3、4一笼;5一轮毅; 6一皮带轮;7一轴承架仍一电机区内，最先受到最内层转动钢棒打击以后，被抛向转动方向与之相反的另一排钢棒物料再次被破碎，然后再被抛向第三排钢棒圈，最后经受最外层钢棒圈打击后，由破碎机底部排出。笼形破碎机的钢棒易于磨损，故虽然其产品拉度细小而均匀，但应用仍受到限制。 (王宏勋)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。