1) modulus of rupture in bending
弯曲断裂模量
2) bending fracture
弯曲断裂
1.
The bending fracture problems of cracked plate for anisotropic functionally graded materials under loads of pure bending,pure twisting or bending and twisting are discussed.
探讨各向异性功能梯度材料裂纹板受纯弯、纯扭、弯扭载荷作用下的弯曲断裂问题。
2.
The bending fracture problems of cracked plate for functionally graded materials under loads of pure bending,pure twisting or bending and twisting are discussed.
讨论功能梯度材料裂纹板受纯弯、纯扭、弯扭载荷作用下的弯曲断裂问题。
3) modulus of rupture in torsion
扭曲断裂模量
4) flexure fracture force
弯曲断裂力
5) flexural modulus
弯曲模量
1.
Preparation and flexural modulus of biodegradable composites reinforced with kenaf fibers;
洋麻纤维增强全降解复合材料的制备及其弯曲模量
2.
Biodegradable composites reinforced with bagasse fibre were prepared by a press forming,and the thermal properties of fibre and the flexural modulus of composites were investigated in view of the fibre content and length.
利用压制成型制备了甘蔗渣纤维增强可降解复合材料,分析了纤维的热分解性能,研究了纤维含有量和纤维长度对材料弯曲模量的影响,利用Cox剪滞法和材料的结构特点,探讨了一种新的修正模型对弯曲模量的预测。
3.
The flexural strength and flexural modulus will reach the maximum value of 130 MPa and 4.
分别研究了丙烯腈基短切碳纤维含量、引发剂(过氧化苯甲酰,BPO)用量和HA的质量分数对复合材料弯曲强度和弯曲模量的影响。
6) Bending Modulus
弯曲模量
1.
In order to develop the application of FAST testing system in the area of testing,evaluating,and predicting wool fabrics′ overfeeding sewing-shrinkage,The theory model was found between the ratio of fabric sewing-shrinkage,the ratio of fabrics′ bending modulus to stretching modulus(modulus ratio of bending and stretching),and fabric overfeeding capacity and other physical items.
为开发FAST客观测试仪在测试、评价、预测毛面料超喂缝制下缝缩率等有关方面的应用,建立了面料超喂缝纫时缝缩率与织物弯拉模量比(弯曲模量与拉伸弹性系数之比)、超喂量物理指标之间的理论方程,在分析面料弯拉模量比与FAST测试指标之间关系的基础上,推导了利用FAST测试弯拉模量比的计算方法。
补充资料：弯曲模量
分子式：
CAS号：
性质：又称挠曲模量。材料在弹性极限内抵抗弯曲变形的能力。用下式求得： 。式中，E为弯曲模量；L、b、d分别为试样的支撑跨度、宽度和厚度；m为载荷(P)-挠度(δ)曲线上直线段的斜率，单位为N/m2或Pa。
CAS号：
性质：又称挠曲模量。材料在弹性极限内抵抗弯曲变形的能力。用下式求得： 。式中，E为弯曲模量；L、b、d分别为试样的支撑跨度、宽度和厚度；m为载荷(P)-挠度(δ)曲线上直线段的斜率，单位为N/m2或Pa。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条