说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 热致老化
1)  oven ageing
热致老化
2)  Excessive heat causing woven fabric to age
过热导致纤维老化
3)  photoaging [英][,fəutəu'eidʒiŋ]  [美][,foto'edʒɪŋ]
光致老化
4)  thermal ageing
热老化;加热老陈
5)  hygrothermal aging
湿热老化
1.
By studying and summing up the common failure physical models and combining with the quantum mechanics theory on the relationship between the electronic equipment aging reaction rate and tempreture-humidity,a hygrothermal aging life model for solid propellant storage and usage is established with the propellant mechanical properties as the research object.
通过对常用失效物理模型的分析和总结,结合量子力学理论关于电子产品老化反应速率与环境温、湿度的关系,以推进剂力学性能参数为研究对象,建立了固体推进剂贮存使用寿命的湿热老化模型,并通过试验数据拟合得到具体的经验公式。
2.
The hygrothermal aging behavior of the CF /epoxy NOL rings in distilled water at 35℃, 55℃, 65℃and 75℃was analyzed in terms of the absorption characteristics, static and dynamic mechanical properties.
本论文旨在碳纤维缠绕复合材料压力容器的加速湿热老化方案的设计以及储存寿命预测提供基础数据,并对其寿命预测进行初步研究。
3.
In this paper, the standard accelerated hygrothermal aging spectrum for military aircraft composite structures is given based on the domestic climatic environment and the developing aircraft properties, and the aging effects for our composite material system are systematically studied, and the conclusion for guiding and modifying the structure design are given.
本文根据我国气候环境和在研型号性能,编制了适用于军机复合材料结构的标准加速湿热老化谱,并系统研究了国产材料体系的老化效应,得出了指导和修改结构设计的有益结论。
6)  thermal aging
热老化
1.
High performance sealing rubber used for ships (Ⅲ) Study on thermal aging properties of fluorinated rubber vulcanizate;
舰船用高性能密封橡胶研究 (Ⅲ)氟橡胶硫化胶热老化性能研究
2.
The promising effects could be obtained by using different thermal aging tec.
为了探索改善刨花板力学性质的途径,采用全因素试验方法,对刨花板进行热老化处理。
3.
In thermal aging,some plasticizers in the film were evaporated and the PVB chains were broken;but in photo aging,the PVB chains were crosslinked into a larger PVB chain and only a small number of PVB chains were broken.
利用红外光谱和力学性能的变化研究了聚乙烯醇缩丁醛薄膜的热老化和紫外光老化机理,结果表明,在热老化及紫外光老化过程中,PVB薄膜的拉伸强度均是先增大然后再减小。
补充资料:加压空气热老化试验
分子式:
CAS号:

性质:在耐压热空气试验机中进行加速老化试验,以加热前后橡胶物理性能变化来考查橡胶的老化性能。试验在耐压容器中进行,空气压力一般选(0.55±0.02)MPa,试验时每100cm3耐压容器的容积只允许放置试样量不超过1g,在规定的温度下老化一段时间后,试样应置于平面冷至室温后再测定其物理性能。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条