1) finished blend
混成油
2) bottom mounted tank
混成式油罐
4) contamination
[英][kən,tæmi'neiʃən] [美][kən,tæmə'neʃən]
混油
1.
Research on contamination caused by elevation difference in batching transportation;
管道顺序输送高差混油研究
2.
The new model of batch pipeline delivery contamination is established based on the K-εturbulent model and the wall function used to predict problem near the wall.
在K-ε紊流模型和使用壁面函数法处理近壁区问题的理论基础上,建立了顺序输送混油新的模型,并利用PHOENICS软件进行管内顺序输送数值模拟,计算结果清晰地反映出管内两油品交界面处的对流扩散传质现象。
3.
The"died oil" is the root of increasing formed contamination in batch pipeline.
在顺序输送管道中,“死油区”是增加形成混油的根源。
5) intermixing
[英][,intə'miks] [美][,ɪntɚ'mɪks]
混油
1.
The mechanism of intermixing is analyzed.
分析了顺序输送的混油机理,在油品不可压缩、不考虑浮升力影响和油品参数不随温度变化三点基本假设的基础上,建立了混油数学模型。
2.
An intermixing model of elevation difference batching transportation is established.
建立了顺序输送高差混油模型,通过计算流体力学软件PHOENICS对它进行了模拟。
3.
The intermixing model of batch transportation was established and it was calculated with the help of Phoenics.
建立了顺序输送混油模型,使用大型计算流体力学软件Phoenics对它进行了模拟计算。
6) mixed oil
混油
1.
Effective Factor on Oil Mixture and Mixed Oil Treatment in Batch Transportation;
顺序输送中混油量的影响因素及混油的处理
2.
According to the influential factors,in the LuWan product oil pipeline are applied some technical measures,such as reducing initial mixed oil,optimizing operation schedule,optimizing the separation of the mixed oil to control the amount of the mixed oil which is transferred to the final station and then the optimal method was used to increase the amount of the mixed oil that could be m.
在汽柴油顺序输送过程中,鲁皖管道根据混油产生以及影响混油量增加的因素逐步采取了减少初始混油、优化输油方案、优化混油切割等措施控制下载到末站的混油量,并且还采取了优化末站混油回掺的措施增加混油的回掺量。
3.
This paper researches a optical sensor and a new method for product oil identification and mixed oil distinguish and calculates the light intensity of the Fresnel reflection occurred at the interface between the product oil and a measuring probe.
通过分析光的变化磁场的电磁感应对介质的作用以及光在介质分子间能量传递过程建立的电子云导体模型,运用能量守恒原理对光在介质中的传播以及折射现象进行了研究,对不同成品油及其混油的折射率进行测量及相关计算,得到了计算成品油折射率和识别混油的方法。
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条