1) mixed oil quantity
混油量
1.
The examination is given to the computing formulas of mixed oil quantity in the product pipeline of batching transportation.
主要考查了顺序输送成品油管道混油量计算公式,根据3个公式的对比确定在进行成品油管道规划设计混油量的计算时,如何选择合适的混油量计算公式。
2) flow of mixture
混油流量
3) catalyst-oil mixing heat
油-剂混合热量
1.
In order to investigate the influence of the high catalyst-oil mixing heat on residue catalytic cracking,the product distributions of residue catalytic cracking at different mass ratio of catalyst to oil and different reaction temperatures were studied by using a technical pilot scale riser FCC apparatus.
为了研究催化裂化过程中油、剂混合初期混合热量对重油分子裂化反应的影响规律,采用连续反应-再生提升管催化裂化中型实验装置,通过调节剂/油质量比和再生剂温度,考察了油-剂混合热量对重油催化裂化反应过程产品分布的影响,并从烃类结构基团转化的角度深入分析了油-剂混合热量与重油催化转化效率之间的内在关系。
4) contamination
[英][kən,tæmi'neiʃən] [美][kən,tæmə'neʃən]
混油
1.
Research on contamination caused by elevation difference in batching transportation;
管道顺序输送高差混油研究
2.
The new model of batch pipeline delivery contamination is established based on the K-εturbulent model and the wall function used to predict problem near the wall.
在K-ε紊流模型和使用壁面函数法处理近壁区问题的理论基础上,建立了顺序输送混油新的模型,并利用PHOENICS软件进行管内顺序输送数值模拟,计算结果清晰地反映出管内两油品交界面处的对流扩散传质现象。
3.
The"died oil" is the root of increasing formed contamination in batch pipeline.
在顺序输送管道中,“死油区”是增加形成混油的根源。
5) intermixing
[英][,intə'miks] [美][,ɪntɚ'mɪks]
混油
1.
The mechanism of intermixing is analyzed.
分析了顺序输送的混油机理,在油品不可压缩、不考虑浮升力影响和油品参数不随温度变化三点基本假设的基础上,建立了混油数学模型。
2.
An intermixing model of elevation difference batching transportation is established.
建立了顺序输送高差混油模型,通过计算流体力学软件PHOENICS对它进行了模拟。
3.
The intermixing model of batch transportation was established and it was calculated with the help of Phoenics.
建立了顺序输送混油模型,使用大型计算流体力学软件Phoenics对它进行了模拟计算。
6) mixed oil
混油
1.
Effective Factor on Oil Mixture and Mixed Oil Treatment in Batch Transportation;
顺序输送中混油量的影响因素及混油的处理
2.
According to the influential factors,in the LuWan product oil pipeline are applied some technical measures,such as reducing initial mixed oil,optimizing operation schedule,optimizing the separation of the mixed oil to control the amount of the mixed oil which is transferred to the final station and then the optimal method was used to increase the amount of the mixed oil that could be m.
在汽柴油顺序输送过程中,鲁皖管道根据混油产生以及影响混油量增加的因素逐步采取了减少初始混油、优化输油方案、优化混油切割等措施控制下载到末站的混油量,并且还采取了优化末站混油回掺的措施增加混油的回掺量。
3.
This paper researches a optical sensor and a new method for product oil identification and mixed oil distinguish and calculates the light intensity of the Fresnel reflection occurred at the interface between the product oil and a measuring probe.
通过分析光的变化磁场的电磁感应对介质的作用以及光在介质分子间能量传递过程建立的电子云导体模型,运用能量守恒原理对光在介质中的传播以及折射现象进行了研究,对不同成品油及其混油的折射率进行测量及相关计算,得到了计算成品油折射率和识别混油的方法。
补充资料：吸油量
分子式：
CAS号：
性质：规定尺寸的试片在油中于规定温度下浸泡规定时间(通常为24h)后的质量增加百分率。对增塑树脂而言，所用的填充料会吸收部分增塑剂而使有效的增塑剂量减少，故在决定增塑剂含量时必须考虑填充料的吸油量。
CAS号：
性质：规定尺寸的试片在油中于规定温度下浸泡规定时间(通常为24h)后的质量增加百分率。对增塑树脂而言，所用的填充料会吸收部分增塑剂而使有效的增塑剂量减少，故在决定增塑剂含量时必须考虑填充料的吸油量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条