1) contamination mechanics
混油机理
2) management of oil mixture
混油处理
3) mixing mechanism
混炼机理
1.
Elaborated on the structure characteristics and mixing mechanism of VCMT synchronous rotor with 6-wing,and through experiments analyzed the effect of VCMT synchronous rotor with 6-wing on carbon black dispersion and rubber mechanics performance.
详细阐述了六棱VCMT同步转子的结构特点、混炼机理,并通过实验讨论了六棱VCMT同步转子对炭黑分散性及胶料力学性能的影响。
2.
The mixing mechanism of a new kind of extruder-series disc extruder was studied.
文中阐述了一种新型连续混炼设备———串联式磨盘挤出机的混炼机理 ,采用串联式磨盘挤出机和同向平行双螺杆挤出机对聚苯乙烯 /四氧化三铁 /丙烯酸、高密度聚乙烯 /纳米氢氧化镁进行挤出混炼效果研究 ,通过显微照片和图像分析对共混物微观混炼效果进行数学统计分析 ,发现串联式磨盘挤出机混炼性能明显优于同向平行双螺杆挤出机 ,而且改变其磨盘间隙及螺杆转速可以达到不同的混炼效果。
3.
Based on the development of the WXJ-140 reciprocating single screw pin-barrel extruder,the design principle,dynamic simulation of the plasticating system and driving system,mixing mechanism,fluid flow and mix inside the screw elements,and the experimental measurement and modeling of the residence time distribution in the extruder were studied here.
本文以WXJ-140往复式单螺杆销钉挤出机的研制开发为主线,对往复式单螺杆销钉挤出机的设计原理、挤压系统和传动系统运动仿真、混炼机理、螺纹元件内物料三维动态流动过程以及停留时间分布测量和建模等方面进行探索和研究。
4) coagulation mechanism
混凝机理
1.
Study on the coagulation mechanism of wastewater produced from polymer flooding in Shengli Oilfield with aluminum salt coagulants
铝盐混凝剂处理胜利油田聚合物驱采出水混凝机理研究
2.
The microproperties(microstructure,size of species and Zeta potential) and coagulation performance of PSF were explored compared with polyferric sulfate(PFS) and polyferric aluminum(PFA),and coagulation mechanism of PSF was analyzed primarily using hydrolysis species distribution and microproperties.
以水玻璃、硫酸亚铁及氯酸钠为原料,用共聚法制备聚硅酸铁混凝剂(PSF),同时研究PSF的水解过程以及PSF与聚合硫酸铁(PFS)、复合铝铁(PFA)的微观品质(微观结构、形态尺寸及Zeta电位)及混凝性能,并结合水解形态分布及微观品质对PSF的混凝机理进行初步探讨。
3.
The paper illustrates a coagulation physical model of flocculants based on coagulation mechanism.
在混凝机理的基础上, 提出了无机絮凝剂的混凝物理模型。
5) mixing mechanism
混合机理
1.
The structural feature, the mixing mechanisms and the application of cavity transfer mixer using in extrusion were investigated.
阐述了适用于挤出机上的空穴传递混合器(CTM)的结构特点、混合机理,并给出了应用实例。
2.
WT5,5”BZ]This paper discusses mainly the structure of the new type of static flow mixer and its mixing mechanism of Mid Volume Vacuum Resin Dosing Equipment.
讨论了真空树脂灌注机新型静态混合器的结构及小孔自由射流混合机理。
3.
In this paper, mixing mechanism of a new- type stirred tank with penetrated baffles was studied.
对设有开孔挡板的新型穿流搅拌釜的混合机理进行了研究。
6) coagulating mechanism
混凝机理
1.
Electrokinetic characters and coagulating mechanisms of PFC with high-concentration;
高浓度聚合氯化铁(PFC)混凝剂的电动特性及其混凝机理探讨
2.
The Zeta potentials of coagulating particles are measured by JS94F micro electrophoretic mobility detector and the coagulating mechanism of PFC is explained in electrokinetic characters.
通过烧杯实验 ,研究了PFC除浊效果 ,pH值对混凝除浊效果的影响 ;并与氯化铁、工业聚合硫酸铁 (PFS)进行了比较 ;通过电泳实验 ,测量了不同投药量下凝聚颗粒的Zeta电位 ,从电动特性方面解释了PFC的混凝机
3.
The coagulating mechanism of polysilicate-containing composite inorganic polymer flocculants was discussed by studying the Zeta potentials of flocculants and contaminants,the growing processes of flocculates,and the sizes of flocculates.
通过测定含硅多核无机高分子絮凝剂水解沉淀物和废水中污染物的Zeta电位、絮体粒径及不同絮凝阶段的絮体显微照片,并结合絮凝剂的形貌结构和混凝性能探讨了其混凝机理。
补充资料：混有植物油甘酯的植物油脂肪酸甾醇酯
CAS：68990-51-2
中文名称：混有植物油甘酯的植物油脂肪酸甾醇酯
英文名称：Fatty acids, vegetable-oil, esters with sterols, mixed with vegetable-oil glycerides
fatty acids, vegetable-oil, esters with sterols, mixed with vegetable-oil glyce
fatty acids, vegetable-oil, esters with sterols, mixedwith vegetable-oil glycerides
Fatty acids,vegetable-oil,esters with sterols,mixed with vegetable-oil glycerides
中文名称：混有植物油甘酯的植物油脂肪酸甾醇酯
英文名称：Fatty acids, vegetable-oil, esters with sterols, mixed with vegetable-oil glycerides
fatty acids, vegetable-oil, esters with sterols, mixed with vegetable-oil glyce
fatty acids, vegetable-oil, esters with sterols, mixedwith vegetable-oil glycerides
Fatty acids,vegetable-oil,esters with sterols,mixed with vegetable-oil glycerides
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条