1) chemical polish
化学抛光剂<冶>
2) chemical polishing agent
化学抛光剂
1.
Development of green stainless steel chemical polishing agent with high performance;
高性能环保不锈钢化学抛光剂的研制
2.
Further more, comparing is done to the chemical polishing agent MW 6 with conventional polishing solutions regarding their economic value, surface quality control, application area and the development prospect.
着重论述MW- 6不锈钢化学抛光剂的工艺研究过程、工艺条件、质量指标及检测方法 ,同时介绍了它与传统不锈钢化学抛光剂的比较 ,经验价值 ,表面质量控制 ,应用领域及应用前景。
3.
Further more, comparing is done to the chemical polishing agent MW-6 with conventional polishing solutions regarding their economic value, surface quality control, application area and the development prospect.
着重论述MW-6 不锈钢化学抛光剂的工艺研究过程、工艺条件、质量指标及检测方法,同时介绍了它与传统不锈钢化学抛光荆的比较,经验价值,表面质量控制,应用领域及应用前景。
3) chemical polishing
化学抛光
1.
Series lectures on metallic chemical polishing technic PartⅠ-Chemical polishing on steel parts;
金属的化学抛光技术系列讲座 第一讲 钢铁制件的化学抛光
2.
Series lectures on metallic chemical polishing technic PartⅡ—Chemical polishing technics of aluminum and its alloy;
金属的化学抛光技术系列讲座 第二讲 铝及铝合金制件的化学抛光
3.
Series lectures on metal chemical polishing technics Part Ⅲ-Chemical polishing technics for copper and its alloy;
金属的化学抛光技术 第三部分 铜及铜合金制件的化学抛光
4) chemical polish
化学抛光
1.
This paper focuses on the study of the solution and process for alkaline chemical polishing aluminum and its alloy.
主要研究了适合铝及铝合金的碱性化学抛光液及抛光工艺 。
2.
The optimum formula combining oil and rust removing into one for chemical polish was obtained by experimental investigation.
介绍了一种在A3钢上直接化学镀铜的预处理工艺,并通过实验考察和筛选得到了将除油除锈合二为一和化学抛光的较为理想的配方。
5) Electrochemical polishing
电化学抛光
1.
Studies on electrochemical polishing of stainless steel;
不锈钢电化学抛光技术研究
2.
Research on electrochemical polishing technics of high pure aluminum film;
高纯铝的电化学抛光工艺研究
3.
Influence of electrochemical polishing on hemocompatibility of endovascular stent
电化学抛光对血管内支架血液相容性的影响
6) electrochemical polish
电化学抛光
1.
The micrographs of aluminum sheet and the electrochemical polished aluminum sheet are compared.
比较了电化学抛光前后铝片表面的微观结构,用阳极氧化法制备了纳米级多孔氧化铝膜,用扫描电镜研究分析了氧化铝膜孔的排列规律。
2.
The micrographs of the electrochemical polished aluminum samples under different polishing conditions were observed with atomic force microscope (AFM) and the optimum elcetrochemical polishing conditions were obtained, i.
用原子力显微镜观察了不同电化学抛光条件下抛光铝样品表面的微观结构,探索出了电化学抛光预处理的最佳工艺条件:在温度为10℃、乙醇和高氯酸体积比为4∶1的混合液中,于恒电压55V的条件下,对铝片进行电化学抛光30s。
补充资料：抛光剂,抛光混合剂
CAS：68909-13-7
中文名称：焙烧提浓的氟碳铈镧矿；抛光剂,抛光混合剂
英文名称：Bastnaesite, calcined concentrate；Calcined bastnasite；bastnaesite, calcined conc.；polishing compound；Bastnaesite,calcined concentrate
中文名称：焙烧提浓的氟碳铈镧矿；抛光剂,抛光混合剂
英文名称：Bastnaesite, calcined concentrate；Calcined bastnasite；bastnaesite, calcined conc.；polishing compound；Bastnaesite,calcined concentrate
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条