1) overmilling
过度捏合
2) overmixing
['əuvə'miksiŋ]
过捏合
3) kneading
[英][ni:d] [美][nid]
捏合
1.
Pretreatments, for example roasting and kneading, have important influences on the flavor from lipid before extraction.
油料的预处理如焙烤、捏合等方法对油脂香气具有重要的影响。
2.
he mixing and conveying mechanism of the kneading zone was analysed.
定性分析了捏合段的混合及输送机理，讨论了捏合块错列角、螺棱间隙、捏合块头数、螺杆转速等因素对混合质量及输送能力的影响，并由此提出了一些捏合段设计时应注意的问题。
3.
Differential twin screw kneader is a new kind of kneading and delivery equipment with discreteness, mixing, kneading and delivery functions together and it can well deal with problems appearing in mixing and kneading high viscosity materials.
差速双螺杆捏合机是一种新型的捏合输送设备，它集物料的分散、搅拌、捏合、输送等多种功能于一体，能很好解决高粘度物料搅拌、捏合所产生的问题。
4) kneading temperature
混捏温度
1.
According to the analysis test for the pitch performance, the opti mum kneading temperature of the carbon paste was determined,so that the pressing conditions may be modified to improve the quality of the products.
通过对沥青性能的综合测定分析,确定炭素糊料的最佳混捏温度,以改变依据沥青软化点确定混捏温度的做法,改善工艺条件,提高产品质量。
5) nip angle
捏掐角度
6) Kneading Block
捏合块
1.
Numerical simulations on the flow fields of S element and kneading blocks, composed of both positive and negative elements, are conducted by means of FEM.
应用FEM模拟计算了啮合同向双螺杆挤出机正反向螺纹组合的新型螺杆元件S型元件与捏合块元件的流场 ,考查了两种元件流场的特性 ,对比了两种元件流场的挤出特性、分散和分布混合能力。
2.
Kneading blocks are a kind of screw elements wildly used in co-rotating twin screw extruders, with complicated shape and high precision.
捏合块是同向双螺杆挤出机中广泛使用着一种螺杆元件,其外形较复杂,精度要求较高。
3.
Based on the above,the twin-screw and corresponding kneading blocks were designed,and the axial force occurred when the device in working condition was calculated.
本文基于以上思想,从双螺杆的设计起步,确定了双螺杆和与之对应的捏合块规格和参数,并对螺杆工作产生的轴向力进行了计算,选择了相应的止推轴承。
补充资料：Z形捏合机
分子式：
CAS号：
性质：又称Z形捏合机。由容器、Z形叶片、传动装置及支架等部分组成的物料捏合设备。两叶片以不同转速相向旋转，转速比约为1.9:1，叶片与器壁间隙很小，约为1mm，以消除物料滞流区。运转时，叶片推动物料沿轴向和径向运动，使物料受到剪切、拉伸、挤压和分散作用，达到捏合目的。可用于处理液相、固相或固液两相物料，黏度在0.5～l00Pa·s以上。
CAS号：
性质：又称Z形捏合机。由容器、Z形叶片、传动装置及支架等部分组成的物料捏合设备。两叶片以不同转速相向旋转，转速比约为1.9:1，叶片与器壁间隙很小，约为1mm，以消除物料滞流区。运转时，叶片推动物料沿轴向和径向运动，使物料受到剪切、拉伸、挤压和分散作用，达到捏合目的。可用于处理液相、固相或固液两相物料，黏度在0.5～l00Pa·s以上。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条