1) high-speed kneading
高速捏合
2) high-speed kneader,high speed kneaning machine
高速捏和机
3) different-speed mixer
差速搅拌捏合机
1.
The dynamical character and response of different-speed mixer shafts screw flight are obtained by using finite element method to analyze the harmonic response.
采用有限元方法对搅拌轴螺棱进行谐响应分析,得出搅拌轴螺棱的动力特性及动力响应,为差速搅拌捏合机搅拌轴的结构设计及进一步的系统动力分析提供了理论依据。
2.
The different-speed mixer is a new type mixer.
差速搅拌捏合机是一种新型搅拌机。
3.
The different-speed mixer is a new type and high efficiency and all phase double horizontal shaft mixer, which has strong ability of smashing and oneself cleaning and corrosion resisting.
差速搅拌捏合机是一种新型高效的卧式双轴全相自清洁型搅拌捏合设备。
4) kneading
[英][ni:d] [美][nid]
捏合
1.
Pretreatments, for example roasting and kneading, have important influences on the flavor from lipid before extraction.
油料的预处理如焙烤、捏合等方法对油脂香气具有重要的影响。
2.
he mixing and conveying mechanism of the kneading zone was analysed.
定性分析了捏合段的混合及输送机理，讨论了捏合块错列角、螺棱间隙、捏合块头数、螺杆转速等因素对混合质量及输送能力的影响，并由此提出了一些捏合段设计时应注意的问题。
3.
Differential twin screw kneader is a new kind of kneading and delivery equipment with discreteness, mixing, kneading and delivery functions together and it can well deal with problems appearing in mixing and kneading high viscosity materials.
差速双螺杆捏合机是一种新型的捏合输送设备，它集物料的分散、搅拌、捏合、输送等多种功能于一体，能很好解决高粘度物料搅拌、捏合所产生的问题。
5) high speed mixing
快速混捏
1.
Making use of the visible-conceal characters of mixing curve balance point and the d P d t value of the power spectrum curve, it is possible to analyze the paste situation and to determine the mixing time, and this leads to a high speed mixing procedure.
利用混捏曲线平衡点的显隐特点和功率谱曲线的 dPdt 值 ,分析糊料状态 ,确定混捏时间 ,从而实现快速混捏工艺。
6) Kneading Block
捏合块
1.
Numerical simulations on the flow fields of S element and kneading blocks, composed of both positive and negative elements, are conducted by means of FEM.
应用FEM模拟计算了啮合同向双螺杆挤出机正反向螺纹组合的新型螺杆元件S型元件与捏合块元件的流场 ,考查了两种元件流场的特性 ,对比了两种元件流场的挤出特性、分散和分布混合能力。
2.
Kneading blocks are a kind of screw elements wildly used in co-rotating twin screw extruders, with complicated shape and high precision.
捏合块是同向双螺杆挤出机中广泛使用着一种螺杆元件,其外形较复杂,精度要求较高。
3.
Based on the above,the twin-screw and corresponding kneading blocks were designed,and the axial force occurred when the device in working condition was calculated.
本文基于以上思想,从双螺杆的设计起步,确定了双螺杆和与之对应的捏合块规格和参数,并对螺杆工作产生的轴向力进行了计算,选择了相应的止推轴承。
补充资料：捏合
分子式：
CAS号：
性质：（一）是利用机械搅拌使糊状、黏性及塑性物料均匀混合的操作，包括物料的分散和混合两种作用。在捏合机中进行。用于橡胶、塑料、食品、建筑材料等工业。（二）推进剂组分在捏合机中进行混合形成均匀药料的过程，亦称混合。是推进剂制造的一个重要工序，其作用是各组分的均匀混合及各种添加剂的充分分散，通过溶剂对硝化棉的膨润、溶解和搅拌翅对药料的搅拌、捏合作用，制得均匀的可塑性药团。
CAS号：
性质：（一）是利用机械搅拌使糊状、黏性及塑性物料均匀混合的操作，包括物料的分散和混合两种作用。在捏合机中进行。用于橡胶、塑料、食品、建筑材料等工业。（二）推进剂组分在捏合机中进行混合形成均匀药料的过程，亦称混合。是推进剂制造的一个重要工序，其作用是各组分的均匀混合及各种添加剂的充分分散，通过溶剂对硝化棉的膨润、溶解和搅拌翅对药料的搅拌、捏合作用，制得均匀的可塑性药团。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条