1) kneading method
捏合法
1.
Zeolite ZSM-48 has been prepared by using kneading method forthe first time.
一种用于合成ＺＳＭ－４８沸石分子筛的新体系李建权，刘光焕，董晋湘（太原工业大学精细化工研究所，太原０３００２４）关键词捏合法，极浓体系，ＺＳＭ－４８沸石，合成，表征长期以来，沸石合成一直是在模拟天然沸石形成的条件下进行的。
2.
The impact of relationships between pH value and the quality of the product called carboxymethyl cellulose(CMC),which was produced by the kneading method,were studied.
研究了捏合法生产羧甲基纤维素(CMC)产品的pH值与产品质量之间影响关系,采用捏合法生产羧甲基纤维素,通过调整碱液添加量,生产出pH值在7。
2) kneading
[英][ni:d] [美][nid]
捏合
1.
Pretreatments, for example roasting and kneading, have important influences on the flavor from lipid before extraction.
油料的预处理如焙烤、捏合等方法对油脂香气具有重要的影响。
2.
he mixing and conveying mechanism of the kneading zone was analysed.
定性分析了捏合段的混合及输送机理，讨论了捏合块错列角、螺棱间隙、捏合块头数、螺杆转速等因素对混合质量及输送能力的影响，并由此提出了一些捏合段设计时应注意的问题。
3.
Differential twin screw kneader is a new kind of kneading and delivery equipment with discreteness, mixing, kneading and delivery functions together and it can well deal with problems appearing in mixing and kneading high viscosity materials.
差速双螺杆捏合机是一种新型的捏合输送设备，它集物料的分散、搅拌、捏合、输送等多种功能于一体，能很好解决高粘度物料搅拌、捏合所产生的问题。
3) Kneading Block
捏合块
1.
Numerical simulations on the flow fields of S element and kneading blocks, composed of both positive and negative elements, are conducted by means of FEM.
应用FEM模拟计算了啮合同向双螺杆挤出机正反向螺纹组合的新型螺杆元件S型元件与捏合块元件的流场 ,考查了两种元件流场的特性 ,对比了两种元件流场的挤出特性、分散和分布混合能力。
2.
Kneading blocks are a kind of screw elements wildly used in co-rotating twin screw extruders, with complicated shape and high precision.
捏合块是同向双螺杆挤出机中广泛使用着一种螺杆元件,其外形较复杂,精度要求较高。
3.
Based on the above,the twin-screw and corresponding kneading blocks were designed,and the axial force occurred when the device in working condition was calculated.
本文基于以上思想,从双螺杆的设计起步,确定了双螺杆和与之对应的捏合块规格和参数,并对螺杆工作产生的轴向力进行了计算,选择了相应的止推轴承。
4) Kneading Disc
捏合盘
1.
Effect of Staggering Angle of Kneading Disc of Co-rotating Twin Screw Extruder on Reactive Extrusion for LDPE-g-MAH;
同向双螺杆捏合盘错列角对MAH接枝LDPE反应的影响
5) kneading element
捏合元件
1.
Screw type in extrusion system, the conveying and mixing characteristics of screw flight elements and kneading elements, screw associating pattern and operating conditions were described mainly.
介绍了啮合型同向旋转双螺杆挤出机的起源和发展,着重论述了该型挤出机挤压系统中的螺杆型式、螺纹元件和捏合元件的输送及混炼特性、螺杆组合型式和操作条件以及应用情况。
6) high-speed kneading
高速捏合
补充资料：Z形捏合机
分子式：
CAS号：
性质：又称Z形捏合机。由容器、Z形叶片、传动装置及支架等部分组成的物料捏合设备。两叶片以不同转速相向旋转，转速比约为1.9:1，叶片与器壁间隙很小，约为1mm，以消除物料滞流区。运转时，叶片推动物料沿轴向和径向运动，使物料受到剪切、拉伸、挤压和分散作用，达到捏合目的。可用于处理液相、固相或固液两相物料，黏度在0.5～l00Pa·s以上。
CAS号：
性质：又称Z形捏合机。由容器、Z形叶片、传动装置及支架等部分组成的物料捏合设备。两叶片以不同转速相向旋转，转速比约为1.9:1，叶片与器壁间隙很小，约为1mm，以消除物料滞流区。运转时，叶片推动物料沿轴向和径向运动，使物料受到剪切、拉伸、挤压和分散作用，达到捏合目的。可用于处理液相、固相或固液两相物料，黏度在0.5～l00Pa·s以上。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条