1) High-Crystallized
高结晶
1.
Development and Industrialization of High-Crystallized Polypropylene;
高结晶聚丙烯研制与工业化
2) High-pressure crystallization
高压结晶
1.
Effect of PET molecular weight on high-pressure crystallization behaviours of PET/PC blends;
PET分子量对PET/PC共混体系高压结晶行为的影响
2.
Compounding ratio effect on high-pressure crystallization behaviours of PET/PC blends was investigated by SEM and WAXD measurements.
利用SEM及W AXD等测试手段研究了配比对PET/PC共混物高压结晶行为的影响。
3.
Adding 10%(mass fraction) PC to PET,we obtained plenty of polymer extended-chain single crystals with C axis thickness exceeding 100 μm during the study on the high-pressure crystallization behaviors of PET/PC blends with a self-made piston-cy.
加入10%(质量分数)聚碳酸酯(PC)于聚对苯二甲酸乙二醇酯(PET)中,在研究PET/PC共混体系高压结晶行为的过程中快速合成了大量生长厚度超过100μm的聚合物伸直链晶体,并采用扫描电子显微镜对其进行了深入研究。
3) high crystallization
高结晶度
4) high temperature crystallization
高温结晶
1.
The kieserite was prepared by high temperature crystallization from the supersaturated solution of MgSO\-4.
硫酸镁溶液高温结晶生成MgSO4·H2 O ,在硫酸镁溶液中加入硼酸降低硫酸镁的极限饱和度 ,增加结晶推动力 ,使硫酸镁溶液的稳定性降低 ,有利于硫酸镁结晶生成MgSO4·H2 O ,提高MgSO4·H2 O的结晶产率 。
5) high combined water
高结晶水
1.
High grade ores and lumps are decreased rapidly,while fines and concentrates,especially,those with high combined water are markedly increased.
世界锰资源供不应求,随着多年的开采,国内锰矿富矿资源锐减,生产的锰矿已远不能满足要求,每年需大量进口,且进口锰矿石性能日趋复杂,富矿、块矿不断减少,粉矿和经分选后的精矿甚至高结晶水的锰矿石比例明显增加。
2.
Strong fired pellets were produced by simulating grate-kiln process to supply high-quality charges from some imported manganese ore fines containing high combined water,which was preliminarily pretreated by high press roll grinding.
以进口高结晶水含量的锰矿粉为原料,经过开路二次高压辊磨预处理,模拟链篦机-回转窑工艺制备高强度高品位氧化球团。
6) high crystallinity
高结晶性
1.
In this paper, Fe~(3+)-based Co~(2+)-Ni~(2+)-Fe~(3+) CO_3~(2-) LDHs materials with high crystallinity and well regular shape was hydrothermally synthesized by using trisodium citrate (TSC) as a chelating agent at 150℃and the molar ratio of Co~(2+)/Ni~(2+)/Fe~(3+)=0.
5/3/1高结晶性规则六边形貌Co~(2+)-Ni~(2+)-Fe~(3+) LDHs层状新材料,提出了络合剂协助均相沉淀法制备三元组分Co~(2+)-Ni~(2+)-Fe~(3+) LDHs层状材料的形成机理。
2.
With polyesters polyol and polyethers polyol as soft chain segment,diisocyanates as hard chain segment and use different types of additives,so an one-component reactive polyurethane(PUR) hot melt adhesive with high crystallinity and excellent performance was synthesized.
以聚酯多元醇、聚醚多元醇为软段,二异氰酸酯为硬段,辅以多种添加剂,制得一种性能优异的高结晶性单组分反应型聚氨酯(PUR)热熔胶。
补充资料：高结晶聚丙烯
分子式：
CAS号：
性质：结晶度70％以上的聚丙烯，具有高刚性，高耐热性，表面硬度高，制品变形率低。热变形温度比普通聚丙烯高20～30℃，密度0.912g/cm3，熔体指数10g/min的产品，等规度98％～99％，熔点167℃，结晶温度128℃。弯曲模量2300～2500MPa。采用高活性、高性能催化剂使丙烯聚合而成。用作代替ABS制作器具、汽车部件(如内装饰板、仪表板)，或取代云母填充聚丙烯作微波炉食品托盘，透明硬质食品包装等。
CAS号：
性质：结晶度70％以上的聚丙烯，具有高刚性，高耐热性，表面硬度高，制品变形率低。热变形温度比普通聚丙烯高20～30℃，密度0.912g/cm3，熔体指数10g/min的产品，等规度98％～99％，熔点167℃，结晶温度128℃。弯曲模量2300～2500MPa。采用高活性、高性能催化剂使丙烯聚合而成。用作代替ABS制作器具、汽车部件(如内装饰板、仪表板)，或取代云母填充聚丙烯作微波炉食品托盘，透明硬质食品包装等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条