1) Fe-Cr-Ni coating
Fe-Cr-Ni镀层
2) Fe-Cr-Ni plating layer
Fe-Cr-Ni合金镀层
3) Ni-Fe-P coating
Ni-Fe-P镀层
4) nickel-chromium alloy coating
Ni-Cr合金镀层
5) Ni-Cr composite coating
Ni-Cr复合镀层
1.
The oxidation results at 750 ℃ show that the ENCCs have a superior oxidation resistance compared to EMCC, for the as-codeposited Ni-Cr composite coatings of a given Cr particles content, the finer the Cr particles, the better the .
采用复合电镀技术,通过向普通电镀溶液中分别加入平均粒度约40nm和1~5μmCr粉的方法,在Ni基材上制备了2种金属Ni基纳米Cr粒子弥散的Ni-Cr复合镀层(简称为ENCCsNi-Cr)和1种微米Cr粒子弥散的Ni-Cr复合镀层(简称为EMCCsNi-Cr)。
2.
05mol/L H2SO4 was investigated by using potentiodynamic polarization and capacitance measurement in order to investigate the effect of Cr particle sizen on the corrosion behavior of Ni-Cr composite coatings.
为了对Cr颗粒尺寸如何影响Ni-Cr复合镀层的电化学腐蚀性能有更深的认识,采用复合电镀技术,通过向普通电镀溶液中分别加入平均粒度约为40nm和1~5μm Cr粉的方法,在Ni基材上制备了2种Cr含量相近的Ni-Cr复合镀层。
6) Ni-Fe-W alloy coatings
Ni-Fe-W合金镀层
1.
A new Ni-Fe-W alloy coatings were obtained by pulse electrodeposition,the effect of W in the electrolyte contents on the structure of coatings,and the effect of the electrolyte contents on the hardness and thickness of coatings were discussed.
利用脉冲电沉积的方法制备了Ni-Fe-W合金镀层,讨论了镀液中W的含量对Ni-Fe-W合金镀层组织结构的影响,以及镀液成分对镀层硬度及厚度的影响。
2.
Then,the effects of the concentration of NiSO_4·6H_2O、Na_2WO_4·2H_2O、FeSO_4·7H_2O and temperature on the quality of Ni-Fe-W alloy coatings are also addressed.
并采用正交实验的方法研究了主盐浓度以及温度对脉冲电沉积Ni-Fe-W合金镀层的影响,通过对硬度、沉积速度以及外观的分析,筛选出了最佳的工艺条件。
补充资料：200t电渣炉生产的180t26Cr2Ni4MoV钢锭
200t电渣炉生产的180t26Cr2Ni4MoV钢锭
200t电渣炉生产的1 80t 26Cr2Ni4MoV钢锭
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条