1) com-stir friction stir spot welding
复合搅拌摩擦点焊
1.
Influences of processing parameters on mechanical properties of com-stir friction stir spot welding joints;
工艺参数对复合搅拌摩擦点焊接头力学性能的影响
2) Friction stir spot welding
搅拌摩擦点焊
1.
A new innovative joining technology to replace conventional resistance spot welding——friction stir spot welding;
一种替代传统电阻点焊的创新技术——搅拌摩擦点焊
2.
Friction stir spot welding technology is developed on the basis of the'linear type'friction stir welding(FSW).
搅拌摩擦点焊(FSSW)技术是在“线性”搅拌摩擦焊接(FSW)基础上开发的一种新的焊接技术。
3.
Friction stir spot welding technology is also introduced.
对搅拌摩擦点焊技术进行了介绍。
3) friction stir weld
搅拌摩擦焊
1.
Investigation on defect dynamic echo waveform of friction stir welding;
搅拌摩擦焊焊缝缺陷的超声波动态波形分析
2.
The metal flowing behavior in weld zone has a great influence on the welds mechanical performance in friction stir welding.
搅拌摩擦焊中焊缝材料的流动对焊件性能有很大影响。
3.
The friction stir welding (FSW) of 5 mm thickness plates of 1060 Al/3003 Al was carried out.
搅拌摩擦焊中,材料的流动状态对焊件性能有很大影响。
4) friction stir welding
搅拌摩擦焊
1.
Influences of friction stir welding parameters on microstructure and mechanical properties of dissimilar magnesium alloys joint;
搅拌摩擦焊工艺参数对异种镁合金接头组织和性能的影响
2.
Development and application of friction stir welding;
搅拌摩擦焊接技术的研究进展和应用
3.
Analysis of Defects in Friction Stir Welding of Aluminum Alloy;
铝合金搅拌摩擦焊焊接过程缺陷分析
5) friction stir welding(FSW)
搅拌摩擦焊
1.
This paper introduces the principle and characteristics of friction stir welding(FSW),the materials and design of shoulder and pin of FSW,the fix of welded workpiece,the application of simulation and modeling techniques,as well as the feasibility of its applications to naval weaponry such as advanced amphibious assault vehicle(AAAV) and ships.
概述了搅拌摩擦焊的工作原理及其特性,搅拌摩擦头材料与设计,被焊接工件的固定,模拟和模型技术的应用,以及它在船舶和两栖突击车上的应用可行性。
2.
The influence of friction stir welding(FSW) process on magnesium alloy's mechanical properties is analyxed through tensile tests and bend tests.
采用不同搅拌摩擦焊工艺焊接镁合金,通过拉伸、三点弯曲试验分析了工艺参数对焊缝机械性能的影响。
3.
6M NaCl solution,by static weight loss experiment(gravimetric test) and potentiodynamic polarization curve and electrochemical impedance spectroscopy(EIS),the electrochemical corrosion behaviors of friction stir welding(FSW) dissimilar weld of 5083 and 6082 aluminum alloy and two parent materials were comparatively investigated.
首先,对铝合金5083-6082搅拌摩擦焊(FSW)焊缝与5083母材、6082母材的金相组织进行了研究,结果表明,焊缝的组织与两种母材相比,其晶粒明显细化。
6) friction-stir welding
搅拌摩擦焊
1.
Investigation of the technology of friction-stir welding for dissimilar materials of T2 copper to H62 brass;
T2紫铜与H62黄铜异种材料间的搅拌摩擦焊工艺研究
2.
Wearing mechanism of tools in friction-stir welding joint of stainless steel;
不锈钢搅拌摩擦焊摩擦头磨损机理研究
3.
Microstructures and mechanical properties of friction-stir welding joint of 7A09 aluminium alloy thick-sheet;
7A09铝合金厚板搅拌摩擦焊接头显微组织与性能研究
补充资料：摩擦功能复合材料
分子式：
CAS号：
性质：具有高摩擦系数、低磨损速率的复合材料。摩擦功能复合材料的主体是高聚物基复合材料，以酚醛树脂等高聚物为基体，石棉纤维、玻璃纤维、碳纤维、有机纤维、钢纤维为增强组分，天然矿石粉、合成氧化物粉、石墨粉、橡胶粉、金属粉为摩擦性能调节剂，可用于500℃以下的情况下，以铁、铜等金属为基体的金属陶瓷复合材料可用于更高的温度。新型碳复合材料具有高度稳定的摩擦系数，耐磨、耐热，但价格较贵，常用来制作制动器、离合器或转向机构中的摩擦部件，以其高摩擦特性及时停止机械运动或改变机械运动的方向和速度。
CAS号：
性质：具有高摩擦系数、低磨损速率的复合材料。摩擦功能复合材料的主体是高聚物基复合材料，以酚醛树脂等高聚物为基体，石棉纤维、玻璃纤维、碳纤维、有机纤维、钢纤维为增强组分，天然矿石粉、合成氧化物粉、石墨粉、橡胶粉、金属粉为摩擦性能调节剂，可用于500℃以下的情况下，以铁、铜等金属为基体的金属陶瓷复合材料可用于更高的温度。新型碳复合材料具有高度稳定的摩擦系数，耐磨、耐热，但价格较贵，常用来制作制动器、离合器或转向机构中的摩擦部件，以其高摩擦特性及时停止机械运动或改变机械运动的方向和速度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条