1) lamellar porous
层状多孔陶瓷
2) porous laminated silicon nitride ceramics composite
层状多孔氮化硅陶瓷
1.
The three layered porous laminated silicon nitride ceramics composites were fabricated by this technique.
以此种控制多孔氮化硅气孔率的工艺为基础,制备三层层状多孔氮化硅陶瓷,考察中间层的成分和层间界面对层状多孔氮化硅陶瓷微观组织和力学性能的影响。
3) porous ceramic
多孔陶瓷
1.
Fabrication of Porous Ceramic With Starch as the Pore-forming Agent;
以淀粉作造孔剂制备多孔陶瓷
2.
Preparation of TiO_2 porous ceramic;
TiO_2多孔陶瓷的制备
3.
Al_2O_3 matrix porous ceramics prepared by SHS;
燃烧合成法制备的Al_2O_3基多孔陶瓷
4) porous ceramics
多孔陶瓷
1.
Preparation and development of porous ceramics;
多孔陶瓷制备技术的进展
2.
Fabrication of porous ceramics using polymeric sponge dipping method;
有机泡沫浸渍法制备多孔陶瓷
3.
Research on fabrication of warp-knitted space porous ceramics by impregnation process;
由浸渍工艺制备经编间隔结构多孔陶瓷的研究
5) laminated ceramics
层状陶瓷
1.
Study on SiC/Si laminated ceramics fabricated from paper by laminated design;
纸叠层设计制备SiC/Si层状陶瓷研究
2.
The surface flaws of different sizes were introduced into SiC/BN laminated ceramics by Vickers indentation method.
采用压痕法在SiC/BN层状陶瓷试样的表面引入不同尺寸的表面裂纹,利用三点弯曲测量含裂纹试样的极限断裂应力,研究了不同尺寸的表面裂纹对层状陶瓷断裂强度的影响;根据压痕载荷-强度实验结果,测定层状陶瓷的阻力曲线,并与单相SiC陶瓷对比。
6) laminated ceramic
层状陶瓷
1.
In the present work,aqueous gelcasting-hot pressing technique to prepare oxide matrix laminated ceramic composites by(using) Al_2O_3(YAG) as matrix layers and LaPO_4 as interfacial layers.
重点研究工艺参数及界面层成分对层状陶瓷复合材料室温性能的影响。
2.
Tribological behavior and wear mechanism of ZrO 2-Al 2O 3 laminated ceramics under dry friction and water lubrication conditions were studied.
结果表明 :相同条件下 ,层状陶瓷的摩擦系数和磨损率均低于单层陶瓷 ,根本原因在于层状陶瓷表面的压应力导致的韧性提高和磨损表面剪切应力的降低。
补充资料:多孔磷酸钙生物陶瓷
分子式:
CAS号:
性质: 是一种含活体细胞的骨替换材料。生物陶瓷为其提供良好的生物相容性和骨传导性;骨髓细胞作为其成骨细胞的源,赋予材料骨诱导性。可用于长骨段缺损的修复。
CAS号:
性质: 是一种含活体细胞的骨替换材料。生物陶瓷为其提供良好的生物相容性和骨传导性;骨髓细胞作为其成骨细胞的源,赋予材料骨诱导性。可用于长骨段缺损的修复。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条