1) in-situ coordinated polymerization
原位配位聚合
1.
A novel methodology for the preparation of polyethylene/palygorskite nano-composites, "in-situ coordinated polymerization" was proposed.
本文采用“原位配位聚合法”成功地制备了一种新型有机／无机纳米复合材料—聚乙烯／凹凸棒石纳米复合材料。
2) coordination polymerization
配位聚合
1.
Study on coordination polymerization preparation of syndiotactic 1,2-polybutadiene with cobalt catalyst system;
钴系催化剂配位聚合制备间同丁二烯的研究
2.
Progress in ethylene aqueous-phase coordination polymerization;
乙烯水相配位聚合反应的研究进展
3.
Coordination polymerization of n-octyl isocyanate catalyzed by rare earth phosphonate catalyst(Nd(P_(204))_3) using Al(i-Bu)_(3) as cocatalyst was carried out at-10 ℃ to obtain poly(n-octyl isocyanate) with a high molecular weight and narrow molecular weight distribution.
报道了由稀土膦酸酯盐-烷基铝组成的催化体系在温和条件下催化正辛基异氰酸酯(n-OctNCO)的配位聚合特征。
3) in situ polymerization
原位聚合
1.
Preparation of microcapsules for electrophoretic display via in situ polymerization of urea-formaldehyde;
一步原位聚合法制备电泳显示微胶囊的研究
2.
Preparation of microcapsules for E-ink via in situ polymerization of urea,melamine and formaldehyde
尿素/三聚氰胺/甲醛原位聚合制备微胶囊化电子墨水
3.
Unsaturated polyester resin(UP) /kaolinite intercalation nanocomposites were prepared by in situ polymerization through UP replacing DMSO in kaolinite/ DMSO intercalation usher,which was prepared by sonochemistry technique.
利用超声法制备了高岭土-DMSO插层复合物前驱体,采取二步取代,原位聚合制备了不饱和聚酯树脂/高岭土纳米复合材料,并用XRD、FT-IR等手段对材料结构进行了表征,研究了纳米复合材料的阻燃性能。
4) in-situ polymerization
原位聚合
1.
Apply of composite particles of methyl methacrylate and calcium sulphate with a core-shell microstructure prepared through in-situ polymerization;
原位聚合制备核壳结构甲基丙烯酸甲酯/硫酸钙复合粒子的应用
2.
Preparation of maleic anhydride-functionalized EPDM/PA6 blend as a thermoplastic elastomer by in-situ polymerization;
原位聚合法制备马来酸酐化EPDM/PA6共混型热塑性弹性体
3.
Study of Mechanical Properties of Polylactide/Hydroxyapatite Composites Prepared by In-situ Polymerization;
原位聚合PLA/HA复合材料的性能研究
5) situ polymerization
原位聚合
1.
The polyurethane-isocyurnate(PUI) material reinforced by nano-CaCO_3 was prepared by situ polymerization on the basis of studying PUI fundamental formula and investigating dispersing methods of nano-CaCO_3 in PUI,and its properties were also studied.
通过纳米碳酸钙(nano-CaCO3)分散方法及其聚氨酯-异氰脲酸酯(PUI)基础配方的研究,采用原位聚合方法研制了nano-CaCO3增强PUI材料,并对其性能进行了研究,结果表明,以n(NCO)/n(OH)配比为10∶1,催化剂为DMP-30、其用量为2%(质量分数,下同)的PUI配方为基础,利用超声辐照技术将nano-CaCO3分散于液化MDI中原位聚合所制的材料,不仅拉伸强度和撕裂强度得到显著提高,而且热稳定性也得到明显提高,当nano-CaCO3质量分数为8%时,材料的综合性能最优。
2.
The polyurethane-isocyurnate (PUI)/ nano-CaCO_3 elastomer was prepared by situ polymerization and its composition and properties were also studied.
采用原位聚合方法合成了聚氨酯-异氰脲酸酯(PUI)/nano-CaCO3弹性体材料,并对其组成及性能进行了研究。
3.
The surface of attapulgite was encapsulated with the PANI doped with phosphate acid(H3PO4) to synthesize the H3PO4-PANI/ATP nanocomposites by in situ polymerization method.
用原位聚合法在凹凸棒土(ATP)的表面包覆上磷酸(H3PO4)掺杂的聚苯胺(PANI),合成了H3PO4-PANI/ATP纳米复合材料,研究了聚合时间、H3PO4掺杂量、过硫酸铵(APS)用量、聚合温度和苯胺投料量对复合材料体积电阻率的影响。
6) in-situ
[英][,ɪn 'sɪtju:] [美]['ɪn 'sɪtju]
原位聚合
1.
The synthesis means of pure PET and PET/SiO2 nanocomposites in-situ was indexed.
简要介绍了用原位聚合合成PET及PET/SiO2纳米复合材料的方法,并对合成材料的力学性能和摩擦性能进行了研究。
2.
From blending, in-situ polymerizing and nano compounding, UHMWPE can be obtained in different properties and different applications.
本文采用原位聚合法制备了较高刚性和高耐热温度的填料／超高分子量聚乙烯(UHMWPE)复合材料；通过插层聚合处理蒙脱土(MMT)，再经过熔融插层混合，制得综合性能优良的MMT／UHMWPE纳米复合材料，并对UHMWPE加工改性进行了探索研究。
补充资料：异配位体配位化合物
分子式：
CAS号：
性质：又称异配位体配位化合物。中心离子同时与两种以上不同配体共存于配位内界所组成的单核或多核配位化合物。例如，三氯·氨合铂(II)酸钾和(2)铜(II)-吡啶(py)-水杨酸(sal)配位化合物。在溶液中混配配位化合物的形成是普遍现象。与单一型配位化合物比较，它加强了中心体的化学个性(如易满足高配位数、增强不稳价态稳定性、光学性质改变等)，也加强了配体的反应活性和协同萃取效应。在湿法冶金、电化学、分析化学、药物化学、环境化学、生物无机化学和材料化学等方面有着重要作用。
CAS号：
性质：又称异配位体配位化合物。中心离子同时与两种以上不同配体共存于配位内界所组成的单核或多核配位化合物。例如，三氯·氨合铂(II)酸钾和(2)铜(II)-吡啶(py)-水杨酸(sal)配位化合物。在溶液中混配配位化合物的形成是普遍现象。与单一型配位化合物比较，它加强了中心体的化学个性(如易满足高配位数、增强不稳价态稳定性、光学性质改变等)，也加强了配体的反应活性和协同萃取效应。在湿法冶金、电化学、分析化学、药物化学、环境化学、生物无机化学和材料化学等方面有着重要作用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条