1) Chopped carbon fiber mat
短切碳纤维毡
2) fiberglass chopped strand mat
玻璃纤维短切毡
1.
In This paper,this paper introduces the manufacture of fiberglass chopped strand mat,and some kinds of structure and craft of settlement room in china and foreign countries.
根据玻璃纤维短切毡生产过程中,国内外多种沉降室的结构方式及工艺对短切玻璃纤维沉降造成的影响,提出了适用于短切毡生产的大型玻璃纤维短切毡沉降室结构及生产工艺,其沉降室采用整体式地上三机头三独立分区式的大型沉降室,提出了短切毡均匀度的控制方法。
3) short carbon fiber
短切碳纤维
1.
Experimental study on compressive strength of short carbon fiber concrete
短切碳纤维钢筋混凝土板的平截面试验研究
2.
Preparation and property of short carbon fiber reinforced HA/PMMA bio-composites
短切碳纤维增强HA/PMMA生物复合材料的制备及性能
3.
Electromagnetic parameters of the ferrites and short carbon fiber composites were measured,and reflectivity of single-layer and double-layer composites with the thickness of 2mm is calculated in Ku waveband respectively.
使用溶胶凝胶法制备了M型和W型六角铁氧体,测量了铁氧体、短切碳纤维复合材料在Ku波段的电磁参数,并计算了层厚为2mm的单层和双层复合材料反射率。
4) short chopping carbon-fiber
短切碳纤维
1.
Silicon nitride ceramics were prepared by hot-press sintering method using α-Si3N4 power with short chopping carbon-fiber as starting materials,Y2O3-La2O3 and LiF-MgO-SiO2 as additives,respectively.
采用Y2O3-La2O3和LiF-MgO-SiO22组烧结助剂,通过短切碳纤维增韧的方法,热压烧结制备了氮化硅陶瓷,并对所得氮化硅陶瓷的相组成、微观结构和力学性能进行了分析和讨论。
2.
Csf/Si3N4 composites were prepared by hot-press sintering method using α-Si3N4 power,short chopping carbon-fiber as starting materials and sintering additives.
采用热压烧结的方法,以α-Si3N4粉和短切碳纤维为主要原料,以Y2O3和La2O3为烧结添加剂,制备Csf/Si3N4复合材料,研究了其力学性能和微波介电性能。
5) chopped carbon fiber
短切碳纤维
1.
Millimeter wave absorbing properties of reinforced composites with different length and content of chopped carbon fiber are investigated at the bands of 8mm(26.
本文研究了不同长度和含量的短切碳纤维复合材料在8 mm波段(26。
6) short carbon fibers
短切碳纤维
1.
An in-situ polymerizing and solution co-mixing approach was used in the formation of poly(methyl methacrylate)(PMMA) matrix composites using hydroxyapatite(HA) nano-particles and short carbon fibers(C(f)) as reinforcing materials.
以丙烯腈基短切碳纤维(C(f))为增强相、纳米羟基磷灰石( HA)为改性体,并以聚甲基丙烯酸甲酯(PMMA)为基体,采用原位合成与溶液共混相结合的方法制备了C(f)/ HA-PM-MA生物复合材料。
2.
Introducing preparation of electromagnetic shielding concrete containing short carbon fibers and ferrite power, properties of micro-wave transmission and absorbing are tested.
介绍了掺短切碳纤维和铁氧体粉末的电磁屏蔽混凝土的制备,测试了样品的电磁屏蔽性能,并比较了3mm与6mm短切碳纤维及其与铁氧体的复合结构在吸波混凝土中的屏蔽效能,分析、总结了实验样品中反映出来的规律,为设计高性能电磁屏蔽混凝土提供了依据。
3.
Improved PMR type polyimide matrix resin was synthesized by incorporating flexible ether-bridged segment into polyimide matrix resin, which was employed to impregnate short carbon fibers to yield molding compound.
采用分子组合技术,通过调节柔性芳基醚链段和刚性—C_6H_4—链段分子得到性能优良的PMR型聚酰亚胺基体树脂材料,将短切碳纤维与此种PMR型聚酰亚胺基体树脂通过湿法混合工艺得到聚酰亚胺复合材料模塑粉,采用热模压一次成型技术制备短切碳纤维增强聚酰亚胺复合材料,并对其性能进行系统的研究。
补充资料：短切原丝毡
分子式：
CAS号：
性质：纤维增强塑料术语。又称为玻璃纤维短切毡。是将连续原丝切成50mm长度(称为短切原丝)后，无定向地均匀分布，再用黏结剂(粉末聚酯或乳液粘接剂)黏合制成的无纺制品，称为短切原丝毡或玻璃纤维短切毡。该制品适用于手糊制作各种板材、船体、浴缸、冷却塔等玻璃钢制品。
CAS号：
性质：纤维增强塑料术语。又称为玻璃纤维短切毡。是将连续原丝切成50mm长度(称为短切原丝)后，无定向地均匀分布，再用黏结剂(粉末聚酯或乳液粘接剂)黏合制成的无纺制品，称为短切原丝毡或玻璃纤维短切毡。该制品适用于手糊制作各种板材、船体、浴缸、冷却塔等玻璃钢制品。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条