1)  blend
共混胶料
1.
The influence of the levels of sulfur,accelerator and modified ground rubber/SBR blend was investigated.
研究了硫黄、促进剂、改性胶粉用量对胶粉／ＳＢＲ共混胶料性能的影响。
2)  S-SBR/NR/NBR blend
偶联型S-SBR/NR/NBR共混胶料
3)  mixing
共混
1.
Study on the Feasibility of Fiber Formation by Mixing Chitosan and Poly(()vinylalcohol);
壳聚糖与聚乙烯醇共混成纤的可行性研究
2.
The four methods to improve melt strength of PP includes using high melt strength PP,PP crosslinking,PP mixing modification and PP/nanocomposites.
重点概述了提高PP熔体强度的4种方法,即采用高熔体强度PP、PP部分交联、PP共混改性及PP/无机物复合材料,并分别介绍了这4种方法的国内外研究进展、特点。
3.
During the process of vinyl silicone rubber's mixing and curing,it owned the ability to achieve insert synthesization with MMT.
采用机械共混原位插层法制备乙烯基硅橡胶/蒙脱土纳米复合材料,在乙烯基硅橡胶混炼和硫化过程中实现与蒙脱土的插层复合。
4)  blending
共混
1.
Study on blending of polyacrylonitrile and thiocyanate intercalated layered double hydroxide;
PAN与硫氰酸根插层水滑石共混体系初探
2.
Study on the feasibility of chitosan and gelatin blending for forming fiber;
壳聚糖明胶共混成纤的研究
3.
Progress in Research on Technology of PP Microcellular Foaming by Blending HDPE;
HDPE共混PP微孔发泡技术研究进展
5)  blend
共混
1.
Preparation of PVDF/TPU Blend Hollow Fiber Membranes for Treatment of Dyestuff Wastewater;
用于处理染料废水的PVDF/TPU共混中空纤维膜的制备
2.
Study on the chloroprene rubber/acrylate rubber blend;
氯丁橡胶/丙烯酸酯橡胶共混研究
3.
Study on polyurethane/polyvinylidene fluoride blend hollow fiber membrane prepared by melt spinning;
熔纺PU/PVDF共混中空纤维膜研究
6)  blends
共混
1.
Compatibility of Toughening Phase in Reactor-Made Polypropylene Blends;
聚丙烯反应器共混合金中增韧成分的相容性
2.
Process and thermal stability of 4-PPM-PPA blends;
4-炔丙氧基苯基马来酰亚胺共混改性聚芳基乙炔
3.
Study on the crystallization and crystal morphologies of PTT/PBT blends;
PTT/PBT共混体系结晶及晶貌形态的研究
参考词条
补充资料：丁腈/聚氯乙烯共混胶
分子式：
CAS号：

性质： 以丁腈橡胶为主，加入30％～50％的聚氯乙烯树脂共混制得的。共混工艺采用两种胶乳，按要求比例混合后再进行凝聚、洗涤、干燥、热处理等工序。与丁腈橡胶相比，丁腈/聚氯乙烯共混胶提高了耐臭氧和耐天候老化性能，改善了拉伸强度、定伸应力、抗撕裂性、耐热性和耐燃性，提高了耐油、耐燃油和耐化学药品性能，改善了压出、压延加工性能，还提高了储存稳定性，并可任意着色。丁腈/聚氯乙烯共混胶用于电线电缆护套、油管外层胶、皮辊和皮圈、汽车模压零件、微孔海绵、发泡绝热层、安全靴等。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。