1) reactive blending
反应共混
1.
The PP/EPOXY alloy was prepared by PP reactive blending with a few epoxy,solidifier and compatibilizer PP-g-MAH.
在聚丙烯PP基体中加入少量环氧树脂EP、固化剂及反应增容剂PP-g-MAH,通过反应共混,制备了PP/EP合金。
2.
The storage stable styrene butadie ne rubber(SBR)modified asphalts were prepared wit h the addition of stabilizer by reactive blending.
在丁苯橡胶(SBR)改性沥青时加入稳定剂,运用反应共混方法研制出了高性能、高温贮存稳定的SBR改性沥青。
3.
Toughness of poly(styrene co maleic anhydride)(SMA)was improved by incorporating certain amount of epoxidized ethylene propylene diene rubber(e EPDM)with reactive blending technique.
利用反应共混技术实现了环氧化三元乙丙橡胶 (e -EPDM )对苯乙烯 -马来酸酐 (SMA)共聚物的增韧改性。
2) reactive blend
反应共混
1.
In order to enhance the compatibility of ABS/PP/CaCO3 composites,the effects of reactive blends of the composites were studied by using Haake rheometer.
2%(wt)时,助交联剂GD比CO、TAIC、JS-1对ABS/PP/CaCO3体系有更好反应共混效果;反应共混超过2。
3) blending reaction
共混反应
4) reactive blend
反应性共混
1.
The crystallization behavior of PET/PBT reactive blends with existence of PBO were studied by FT-IR and WAXD.
通过FT-IR、WAXD研究了在扩链剂存在下PET/PBT反应性共混物的结晶行为,表明PET与PBT为晶相分离,随共混时间的延长,共聚酯中PBT的结晶峰逐渐减弱至消失。
2.
The reactive blending of TIO with polyethylene terephthalate (PET) was carried out in a HAAKE rheometer.
合成了一系列由聚乙二醇、芳香族二异氰酸酯以及乙醇、异丙醇、苯酚组成的封闭型异氰酸酯齐聚物(TIO);应用差示扫描量热法、红外光谱、特性粘数测试等手段,表征了这些TIO的解封闭特性,进而在哈克流变仪上进行聚对苯二甲酸乙二酯与TIO反应性共混,初步研究了共混物的特性粘数和热性能。
3.
, the blending reaction of oxazoline functionalized polystyrc (RPS) and maleic anhydride-grafted polyethylene (MPE) was studied, the stress strain tests of the reactive and no-reactive blends were done, and it was found that 1 reactive blending could improve mechnical properties of PE/PS blend and char crystallization of MPE in the blend.
用IR、DSC、DMA等分析方法研究了噁唑啉官能化聚苯乙烯(RPS)与马来酸酐接枝聚乙烯(MPE)的共混反应,对反应性共混物及相应的非反应性共混物作了应力-应变试验,发现反应性共混提高了PE/PS共混物的力学性能,改变了MPE的结晶情况。
5) reactive blending
反应性共混
1.
PA66/HDPE alloys were prepared by a so called one-step reactive blending in a twin screw extruder.
在双螺杆挤出机上通过一步法反应性共混制备了聚酰胺 66(PA66) /高密度聚乙烯 (HDPE)合金。
2.
A new approach of morphology control during reactive blending of immiscible polymers--pull-out of copolymers was reviewed on the basis of latest experimental results.
在最新实验结果的基础上论述了一种在聚合物反应性共混过程中的相态控制新方法——共聚物分子的界面拔出。
3.
An approach on morphology control during reactive blending of immiscible polymers-interfacial pull out of copolymers was reviewed on the basis of latest experimental results.
结合最新的实验结果论述了在聚合物反应性共混过程中的相形态结构控制方法。
6) reactor blending
反应器共混
补充资料：共析反应
eutectoidreaction:固态转变之一。一个固相对另两个或两个以上的固相同时过饱和，两相或多相同时由过饱和相中析出的反应。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条