1) carboxyl terminated liquid nitrile rubber
端梭基丁腈胶
2) carboxyl-terminated butadiene-acrylonitrile copolymer
端羧基丁腈像胶
3) hydroxyl-terminated nitrile rubber
端羟基丁腈橡胶
1.
The solution copolymerization of butadiene and acrylonitrile for the synthesis of hydroxyl-terminated nitrile rubber was studied with H2O2 as initiator and ethanol as solvent in a l0 L and a 50 L polymerization reactors.
在１０Ｌ和５０Ｌ不锈钢聚合釜中，以合成端羟基丁腈橡胶（ＨＴＢＮ）为目的，用Ｈ＿２Ｏ＿２作引发剂，乙醇作溶剂，研究了丁二烯（Ｂｄ）和丙烯腈（ＡＮ）的溶液共聚合。
2.
The hydroxyl-terminated poly(L-lactic acid) prepolymer is prepared by the melt direct polycondensation process with polyethylene glycol and L-lactic acid,and isocyanate-terminated nitrile rubber(ITBN) is synthesized with toluene-2,4-di-iso-cyanate(TDI),hydroxyl-terminated nitrile rubber(HTBN).
以聚乙二醇和L-乳酸直接熔融缩聚法制备端羟基聚L-乳酸预聚物(HO-PLLA-OH),以甲苯-2,4-二异氰酸酯(TDI)与端羟基丁腈橡胶(HTBN)进行反应,合成了端异氰酸酯基丁腈橡胶(ITBN),然后再将端羟基聚L-乳酸与端异氰酸酯基丁腈橡胶发生偶联反应,合成了乳酸-丁腈橡胶嵌段共聚物,其分子质量高于原料端羟基聚L-乳酸,分子质量分布也比端羟基聚L-乳酸宽。
4) CTBN
端羧基丁腈橡胶
1.
Curing Process and Properties of BCE/CTBN Blends;
双酚A型氰酸酯/端羧基丁腈橡胶共混物的制备工艺和性能
2.
Pre-reaction mechanism of epoxy resin(EP) and CTBN was verified by FT-IR,it was reason that the hydroxyl was formed by esterification reactions between carboxyl and epoxy group.
利用红外光谱确认了环氧树脂(EP)与端羧基丁腈橡胶(CTBN)的预聚反应机理是-COOH与环氧基进行酯化反应生成-OH基团,其最佳反应条件是70℃、3 h。
3.
In the room temperature,a modified epoxy resin(I) prepared from CTBN and epoxy resin AG-80 was mixed proportionately as component A,with the modified epoxy resin(II) from the reaction between silicon-boron resin and bisphenol-A epoxy resin.
用端羧基丁腈橡胶(CTBN)与环氧树脂AG-80反应制得改性环氧树脂(I);以硅硼树脂与双酚A型环氧树脂反应得到改性环氧树脂(Ⅱ);将改性环氧树脂(I)和(II)按比例在室温下充分混匀为A组分,把固化剂、阻燃剂等混配成B组分,将A和B组分按不同配比均匀混合配成灌封材料,并以IR、拉力机等仪器分别对改性树脂、灌封材料进行结构及力学性能的测试表征。
5) CTBN
液体端羧基丁腈橡胶
1.
CTBN MODIFIED BMI CONSTRUCTION ADHESIVE (Ⅱ)THE FORM AND PROPERTIES OF CTBN MODIFIED 1~#/DACPE;
液体端羧基丁腈橡胶改性双马来酰亚胺结构胶粘剂(Ⅱ)DACPE固化BMI体系胶粘剂的改性及形态结构
2.
Aminopolysiloxane and carboxy terminal butadiene-acrylonitrile (CTBN) were used to modify the epoxy resin system, and the heat-resistant epoxy adhesive cured at room temperature was prepared.
采用氨基硅油和液体端羧基丁腈橡胶(CTBN)对环氧树脂进行化学改性,制备出室温固化耐热环氧胶粘剂。
6) CTBN
端羧基液体丁腈橡胶
1.
Dicyclopentadiene bisphenol diyanate ester(DCPDCE) was modified by CTBN to improve its brittleness.
采用端羧基液体丁腈橡胶(CTBN)对双环戊二烯型氰酸酯树脂(DCPDCE)进行改性。
补充资料：4-[反-4-(反-4-丁基环己基)环己基]苄腈
CAS: 88580-93-2
中文名称: 4-[反-4-(反-4-丁基环己基)环己基]苄腈
英文名称: 4-[trans-4-(trans-4-Butylclohexyl) cyclohexyl]benzonitrile；4-[trans-4-(trans-4-Butylclohexyl)cyclohexyl]benzonitrile
中文名称: 4-[反-4-(反-4-丁基环己基)环己基]苄腈
英文名称: 4-[trans-4-(trans-4-Butylclohexyl) cyclohexyl]benzonitrile；4-[trans-4-(trans-4-Butylclohexyl)cyclohexyl]benzonitrile
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条