1) definition of slab thickness
板厚取值
2) Model value
模板取值
3) limited ratio of depth to thickness for web
腹板高厚比限值
4) thick plate
厚板
1.
Welding technology of Cu-Ni alloy B10 thick plate;
Cu-Ni合金B10厚板焊接工艺
2.
Friction-stir welding on thick plate of 7A52 aluminum alloy;
7A52铝合金厚板搅拌摩擦焊
3.
Prediction of angular distortion in thick plate multi-pass weld;
厚板多层多道焊角变形分析方法
5) plate
[英][pleɪt] [美][plet]
厚板
1.
Construction and reform/expansion of aluminum alloy plate worldwide;
世界铝厚板系统的建设与改扩建
2.
The effects of total deformation on the microstructure and room temperature tensile properties of BT-20 alloy plate were studied in α+β.
主要研究了在α+β区总变形量对BT-20钛合金厚板组织与性能的影响,获得了在两相区总变形量控制在71%、85%和91%生产出的三种规格厚板在相同热处理制度下的显微组织以及所对应的室温力学性能。
3.
The effects of four typical structures on the mechanical properties, impact ductility and fracture toughness etc of BT-20 alloy plate were studied under the conditions of room & high temperature.
主要研究了BT-20钛合金厚板4种典型组织对室温、高温力学性能、冲击和断裂韧度等性能的影响。
6) Plate thickness
板厚
1.
According to characteristic of the rolling technology of plate belted steel and the control requirement to steel shape and plate thickness, this paper proposes a decoupling control method based on neural network, and designs an intelligent decoupling controller with self-adapton and self-study decoupling ability.
根据板带钢轧制工艺的特点和板形板厚的控制要求,本文提出了一种基于神经网络的解耦控制方法,并设计了具有自适应、自学习解耦能力的智能解耦控制器。
2.
The microstructures of continuous cast hull steel 10CrNiCu with different plate thickness were studied by transmission electron microscopy.
结果表明 ,在同样的热轧和高温回火工艺条件下 ,随板厚的增加 ,钢板组织中除铁素体与珠光体外 ,逐渐出现了贝氏体分解物 ;铁素体晶粒变大 ,晶界上的第二相增多且长大 ;珠光体片层间距离也略有增加。
补充资料：不取
1.不赞成;不采取。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条