1) plank
[英][plæŋk] [美][plæŋk]
[厚]板，板条
2) thick strip
厚板条
3) flitch
[英][flitʃ] [美][flɪtʃ]
厚条板
4) lamellar thickness
板条厚度
1.
The results showed that the lamellar thickness and volume fraction of equiaxed γ phases and B2+ω phases decreased,the grain size and volume fraction of lamellar α2+γ colonies was raised after isothermal forging.
结果表明等温热锻后板条厚度、B2+ω相、等轴γ相的体积含量均有很大程度的下降,而晶粒尺寸和α2+γ板条体积分数则有增大的趋势。
5) thick plate
厚板
1.
Welding technology of Cu-Ni alloy B10 thick plate;
Cu-Ni合金B10厚板焊接工艺
2.
Friction-stir welding on thick plate of 7A52 aluminum alloy;
7A52铝合金厚板搅拌摩擦焊
3.
Prediction of angular distortion in thick plate multi-pass weld;
厚板多层多道焊角变形分析方法
6) plate
[英][pleɪt] [美][plet]
厚板
1.
Construction and reform/expansion of aluminum alloy plate worldwide;
世界铝厚板系统的建设与改扩建
2.
The effects of total deformation on the microstructure and room temperature tensile properties of BT-20 alloy plate were studied in α+β.
主要研究了在α+β区总变形量对BT-20钛合金厚板组织与性能的影响,获得了在两相区总变形量控制在71%、85%和91%生产出的三种规格厚板在相同热处理制度下的显微组织以及所对应的室温力学性能。
3.
The effects of four typical structures on the mechanical properties, impact ductility and fracture toughness etc of BT-20 alloy plate were studied under the conditions of room & high temperature.
主要研究了BT-20钛合金厚板4种典型组织对室温、高温力学性能、冲击和断裂韧度等性能的影响。
补充资料：板条马氏体
lathmartensite：其单元的立体形貌呈板条形状的那种类型的马氏体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条