1) filler metal thickness
钎缝厚度
1.
Effect of filler metal thickness on creep for stainless steel plate-fin structure;
钎缝厚度对不锈钢板翅结构蠕变的影响
2) Thickness of filler metal
钎料厚度
3) Joint intensity
钎缝强度
4) brazing joint width
钎缝宽度
1.
It was found that the shearing strength of the brazing joint increased and then decreased along with the increase of holding time,while the brazing joint width decreased and then increased.
本文通过PCD复合片与YG8硬质合金的高频感应钎焊试验,研究了恒温时间对PCD刀具钎焊接头强度及钎缝宽度的影响,并用扫描电镜观察了钎焊接头的显微结构,用电子探针分析了接头界面元素分布情况。
5) joint width
焊缝厚度
1.
In order to study the influence of brazing temperature and brazing pressure on shearing strength and joint width of brazed diamond tool,hi-frequency induction brazing experiments with PCD compact and cemented carbide YG8 were carried out.
本文通过PCD复合片与YG8硬质合金的高频感应钎焊试验,研究了钎焊温度和钎焊压力对PDC刀具钎焊接头强度及焊缝厚度的影响;并用扫描电镜观察了钎焊接头的显微结构。
6) seam
[英][si:m] [美][sim]
钎缝
1.
When the microstructure of the brazing seam is in the form of pure solid solution, there is a big increase in remelting temperatu.
利用金相试验和差热分析方法，系统地研究了用镍基钎料钎焊１Ｃｒ１８Ｎｉ９Ｔｉ时钎缝的重熔温度随钎焊工艺变化的规律。
补充资料：打钎
1.采矿﹑开隧道等爆破工程中，以锤击钎子，在岩石上或土中凿孔。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条