共混熔纺,blend spinning,在线英语词典,英文翻译,专业英语

1) blend spinning

共混熔纺

The molecular structure and surface morphology of self-made wool powder/PP blend spinning fiber such as skin-core and blending type were investigated.

研究了以自制的天然羊毛粉末与PP共混熔纺得到的皮芯型、混合型纤维的超分子结构和表面形态,为进一步改善PP纤维性能提供理论基础。

2) mixing

共混

Study on the Feasibility of Fiber Formation by Mixing Chitosan and Poly(()vinylalcohol);

壳聚糖与聚乙烯醇共混成纤的可行性研究

The four methods to improve melt strength of PP includes using high melt strength PP,PP crosslinking,PP mixing modification and PP/nanocomposites.

重点概述了提高PP熔体强度的4种方法,即采用高熔体强度PP、PP部分交联、PP共混改性及PP/无机物复合材料,并分别介绍了这4种方法的国内外研究进展、特点。

During the process of vinyl silicone rubber's mixing and curing,it owned the ability to achieve insert synthesization with MMT.

采用机械共混原位插层法制备乙烯基硅橡胶/蒙脱土纳米复合材料,在乙烯基硅橡胶混炼和硫化过程中实现与蒙脱土的插层复合。

3) blending

共混

Study on blending of polyacrylonitrile and thiocyanate intercalated layered double hydroxide;

PAN与硫氰酸根插层水滑石共混体系初探

Study on the feasibility of chitosan and gelatin blending for forming fiber;

壳聚糖明胶共混成纤的研究

Progress in Research on Technology of PP Microcellular Foaming by Blending HDPE;

HDPE共混PP微孔发泡技术研究进展

4) blend

共混

Preparation of PVDF/TPU Blend Hollow Fiber Membranes for Treatment of Dyestuff Wastewater;

用于处理染料废水的PVDF/TPU共混中空纤维膜的制备

Study on the chloroprene rubber/acrylate rubber blend;

氯丁橡胶/丙烯酸酯橡胶共混研究

Study on polyurethane/polyvinylidene fluoride blend hollow fiber membrane prepared by melt spinning;

熔纺PU/PVDF共混中空纤维膜研究

5) blends

共混

Compatibility of Toughening Phase in Reactor-Made Polypropylene Blends;

聚丙烯反应器共混合金中增韧成分的相容性

Process and thermal stability of 4-PPM-PPA blends;

4-炔丙氧基苯基马来酰亚胺共混改性聚芳基乙炔

Study on the crystallization and crystal morphologies of PTT/PBT blends;

PTT/PBT共混体系结晶及晶貌形态的研究

6) polyblend

共混

Soybean protein /viscose polyblend fiber and its properties;

大豆蛋白/粘胶共混纤维及其性能

The chitosan-gelatin-hyaluronic acid membranes were prepared via surface modification and polyblend methods respectively through co-crosslinking with 1-Ethyl-(3,3-dimethylaminopropyl) carbodiiminde(EDC) and N-hydroxysuccinimide (NHS) in 2-morpholinoethane sulfonic acid(MES)buffer.

本实验采用表面修饰法和共混法两种不同的方法将透明质酸引入壳聚糖- 明胶体系,制备了壳聚糖- 明胶-透明质酸复合薄膜,考察了薄膜的表面形貌、亲水性和力学性能等理化性能以及生物相容性。

参考词条

PTFE/PA66共混物共混胶乳液共混共混膜熔融共混 PP/PA11共混物共混纤维共混炭化共混体系

补充资料：低共熔聚合物

分子式：
CAS号：

性质：能与其他结晶物质相互混溶并在低温下具有低共熔点的聚合物。利用低共熔结晶的方法，可以获得具有特殊结晶形态的聚合物。例如，聚乙烯与1,2,4,5-四氯代苯组成低共熔体系，在高温下形成溶液，在低温下结晶，并具有低共熔点。如将得到的低共熔混合物淬火至室温，四氯代苯升华逸出，最终可获得具有微丝晶结构的聚乙烯。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

首页 \| 翻译 \| 影视 \| 论坛 \| 索引共混合金共混改性共混物共混工艺反应共混 PTFE/PA6共混物

1) blend spinning 共混熔纺 1. The molecular structure and surface morphology of self-made wool powder/PP blend spinning fiber such as skin-core and blending type were investigated. 研究了以自制的天然羊毛粉末与PP共混熔纺得到的皮芯型、混合型纤维的超分子结构和表面形态,为进一步改善PP纤维性能提供理论基础。 2) mixing 共混 1. Study on the Feasibility of Fiber Formation by Mixing Chitosan and Poly(()vinylalcohol); 壳聚糖与聚乙烯醇共混成纤的可行性研究 2. The four methods to improve melt strength of PP includes using high melt strength PP,PP crosslinking,PP mixing modification and PP/nanocomposites. 重点概述了提高PP熔体强度的4种方法,即采用高熔体强度PP、PP部分交联、PP共混改性及PP/无机物复合材料,并分别介绍了这4种方法的国内外研究进展、特点。 3. During the process of vinyl silicone rubber's mixing and curing,it owned the ability to achieve insert synthesization with MMT. 采用机械共混原位插层法制备乙烯基硅橡胶/蒙脱土纳米复合材料,在乙烯基硅橡胶混炼和硫化过程中实现与蒙脱土的插层复合。 3) blending 共混 1. Study on blending of polyacrylonitrile and thiocyanate intercalated layered double hydroxide; PAN与硫氰酸根插层水滑石共混体系初探 2. Study on the feasibility of chitosan and gelatin blending for forming fiber; 壳聚糖明胶共混成纤的研究 3. Progress in Research on Technology of PP Microcellular Foaming by Blending HDPE; HDPE共混PP微孔发泡技术研究进展 4) blend 共混 1. Preparation of PVDF/TPU Blend Hollow Fiber Membranes for Treatment of Dyestuff Wastewater; 用于处理染料废水的PVDF/TPU共混中空纤维膜的制备 2. Study on the chloroprene rubber/acrylate rubber blend; 氯丁橡胶/丙烯酸酯橡胶共混研究 3. Study on polyurethane/polyvinylidene fluoride blend hollow fiber membrane prepared by melt spinning; 熔纺PU/PVDF共混中空纤维膜研究 5) blends 共混 1. Compatibility of Toughening Phase in Reactor-Made Polypropylene Blends; 聚丙烯反应器共混合金中增韧成分的相容性 2. Process and thermal stability of 4-PPM-PPA blends; 4-炔丙氧基苯基马来酰亚胺共混改性聚芳基乙炔 3. Study on the crystallization and crystal morphologies of PTT/PBT blends; PTT/PBT共混体系结晶及晶貌形态的研究 6) polyblend 共混 1. Soybean protein /viscose polyblend fiber and its properties; 大豆蛋白/粘胶共混纤维及其性能 2. The chitosan-gelatin-hyaluronic acid membranes were prepared via surface modification and polyblend methods respectively through co-crosslinking with 1-Ethyl-(3,3-dimethylaminopropyl) carbodiiminde(EDC) and N-hydroxysuccinimide (NHS) in 2-morpholinoethane sulfonic acid(MES)buffer. 本实验采用表面修饰法和共混法两种不同的方法将透明质酸引入壳聚糖- 明胶体系,制备了壳聚糖- 明胶-透明质酸复合薄膜,考察了薄膜的表面形貌、亲水性和力学性能等理化性能以及生物相容性。参考词条 PTFE/PA66共混物共混胶乳液共混共混膜熔融共混 PP/PA11共混物共混纤维共混炭化共混体系补充资料：低共熔聚合物分子式： CAS号：性质：能与其他结晶物质相互混溶并在低温下具有低共熔点的聚合物。利用低共熔结晶的方法，可以获得具有特殊结晶形态的聚合物。例如，聚乙烯与1,2,4,5-四氯代苯组成低共熔体系，在高温下形成溶液，在低温下结晶，并具有低共熔点。如将得到的低共熔混合物淬火至室温，四氯代苯升华逸出，最终可获得具有微丝晶结构的聚乙烯。说明：补充资料仅用于学习参考，请勿用于其它任何用途。
©2008 dictall.com