1)  heat shock protein
热冲击蛋白
2)  hot punching
热冲
3)  thermal shock
热冲击
1.
Growth behavior of IMC at SnAgCu(SnPb)/Ni and SnAgCu(SnPb)/Cu interface during thermal shock;
SnAgCu(SnPb)/Ni和SnAgCu(SnPb)/Cu界面金属间化合物在热冲击过程中的生长规律
2.
Numerical simulation of thermal shock damage behavior of TiC_p/W composites;
TiC_p/W复合材料热冲击损伤行为的数值模拟
3.
The Two-dimensional Computaions With FEM on The Transient Temperature Fields Caused By Thermal Shock;
二维热冲击瞬态温度场的有限元计算
4)  Thermal impact
热冲击
1.
A quick comparative test approach for the property in withstanding thermal impact of metal material is put forward.
基于加速寿命试验原理,提出了一种简捷、实用的金属材料抗热冲击性能的快速对比试验方法。
2.
By using LSDYNA as a solver, the simulation of the dynamic response of short cylindrical shell under thermal impact was carried out on HPC360.
利用LS DYNA作为求解器在HP C360工作站上完成了轴对称圆柱壳受高速热冲击作用的计算机模拟,得到了位移时程曲线和单元的应力时程曲线,并与已有的结果进行了比较,还得到了在不同边界条件下线热膨胀系数、热传导系数以及比热容对位移和应力的影响。
5)  thermal shock resistance
抗热冲击
1.
The close-knit interface and full structure of Ti/Al_2O_3 functionally graded materials(FGM) were obtained by hot pressing sintering method,its thermal shock resistance was studied under the temperature difference 1?000?℃ and 600?℃.
采用热压烧结(HP)技术制备了界面结合紧密、结构完整的Ti/Al2O3梯度功能材料,并分别在1 000℃、600℃温差下对其抗热冲击及抗热疲劳性能进行了研究。
6)  warm forming
温热冲压
1.
Sheet warm forming process, sheet warm hydroforming process and sheet press forging process are introduced in this paper.
介绍了镁合金薄壁板材的温热冲压成形技术、温热液压成形技术和局部热冲锻成形技术。
参考词条
补充资料:普通免疫球蛋白 ,人血丙种球蛋白,丙种球蛋白
药物名称:丙种球蛋白

英文名:γ-Globulin

别名: 免疫血清球蛋白;普通免疫球蛋白 ,人血丙种球蛋白,丙种球蛋白
外文名:γ-Globulin
适应症: 含有健康人群血清所具有的各种抗体,因而有增强机体抵抗力以预防感染的作用。主要用于免疫缺陷病以及传染性肝炎、麻疹、水痘、腮腺炎、带状皰疹等病毒感染和细菌感染的防治,也可用于哮喘、过敏性鼻炎、湿疹等内源性过敏性疾病。
用量用法:
肌注:每次2~5ml,3周1次,用于内源性过敏性疾病,每次10ml(含量10%者),3周内注射2次。胎盘球蛋白每次6~9ml。
注意事项:
1.按球蛋白来源可分为两种,一为健康人静脉血来源的丙种球蛋白制剂,按蛋白质含量有10%、16%、16.5%等数种(国内制品浓度在10%以上),其中丙种球蛋白占95%以上。另一种为胎盘血来源的丙种球蛋白(人胎盘血丙种球蛋白),即胎盘球蛋白,含蛋白质5%,其中丙种球蛋白占90%以上。胎盘球蛋白因丙种球蛋白含量以及纯度均较低,其用量应相应增大。 2.除专供静注用的制剂外,一般制剂不可静注。 3.注射大量时,可见局部疼痛和暂时性体温升高。
注:参见:“丙种球蛋白注射液”.



类别:免疫增强剂(免疫反应调节剂)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。