说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 关键回路
1)  critical circuit
关键回路
1.
In this paper,a computational method of finding total critical circuits of the maximum algebra matrix is present,and basic idea of programming is explained chiefly.
对于极大代数矩阵,本文提出了求全部关键回路的一种计算方法,同时对算法给出了理论证明,并说明了编程要点。
2)  critical path
关键路径
1.
The earned value analysis in project schedule based on critical path;
基于关键路径的项目进度挣值分析
2.
Workflow critical path algorithm based on activities;
基于活动的工作流关键路径算法
3.
The activities sequence in critical path of highway project network;
道路工程项目网络关键路径中的活动排序问题
3)  critical path
关键线路
1.
Convenient matrix calculation method for critical path in twin code network chart;
一种求双代号网络图关键线路的简便矩阵算法
2.
This paper analyzes the time-scaled network plan applied to confirm critical path,gain time factors,control network plan and so on.
就时标网络计划在工程中如何确定关键线路、分析工作时间参数、进行网络计划的控制等进行阐述。
3.
Based on the study of calculating approaches of fuzzy network,this paper puts forward a new method to calculate the parameters and determine the critical path of fuzzy network planning.
基于对模糊网络计算方法的研究,提出了新的网络参数计算和关键线路判断方法。
4)  critical path
关键路
1.
We know that the operation processing time length in a schedule can be calculated through critical path of the corresponding chart.
对于给定加工顺序的n个工件的排列排序,排序时间表长即任务的最后完工时间的计算可以通过与问题对应的有向图的关键路的计算得到。
2.
Proceed to the technique battlefield the test equipment reforms,increasing well-trained degree of the personnel,by using the concurrent technology and the critical path technolog.
改造技术阵地测试设备,提高操作人员的熟练程度,采用并行技术和关键路技术优化导弹测试流程,同时建立战时应急状态下的测试流程,特别是导弹批量测试技术的提出,将极大地提高导弹测试速度,缩短测试时间,为将来技术阵地的建设提供了建议,同时也对将来常规导弹的设计和研制提出了更高的要求。
3.
According to the characteristics of interval plan network,this paper introduces the concept of interval critical path(DBICP).
论文针对区间数计划网络的特点,提出了基于限制期约束的区间关键路(deadline basedinterval critical path,DBICP)的概念,通过相关定理的证明给出了求解DBICP的算法,该算法拓展了Stefan Chanas和Pawel Zielinski关于区间关键路问题的研究成果。
5)  critical path
关键路线
1.
Solve the critical path problem by the shortest path method;
用最短路径法求关键路线及其SAS的实施
2.
This paper focus on deploying resource,make use of the different completion probability of critical and un-critical path,the authors suggest a schedule optimization algorithm based on transferring resources from un-critical path to critical path purposely,and the result of applying the model shows that the method is practical for optimizing project schedule with resourc.
着眼于资源的调配,提出利用关键路线与非关键路线上完工概率的不同,有目的地将非关键路线上的资源调配到关键路线上进行进度计划优化的算法,并对该方法进行了算例说明,结果表明该法对资源约束下的工程项目进度计划优化具有实际意义。
3.
The limitation of the PERT in the planning of construction schedule is studied for two cases, where there are several critical paths, or the sub critical path is close to the critical path.
分析了施工进度计划中当出现多条 (期望 )关键路线及次关键路线和关键路线相接近时应用PERT存在的一些问题 ,指出了在计算完工概率时应用PERT的局限性 ;将多条 (期望 )关键路线及次关键路线和关键路线相接近的情况分为相关和非相关两种情形分别讨论 ,提出相应的完工概率的计算方法 。
6)  key path
关键路径
1.
Study of time parameter and key path arithmetic in engineering building project network planning;
工程网络计划的时间参数与关键路径算法研究
2.
Affecting factors analysis of major equipment erection key path in PWR NPP;
压水堆核电站主设备安装关键路径影响因素分析
3.
Based on the utility analysis in the economics,by searching the key path between a traffic mode and another transfer mode in the intermodal transfer points,a utility cost model is put forward to evaluate and optimize the facilities layout alternatives of the urban intermodal passenger transfer points.
利用经济学中效用分析法,通过寻找枢纽内存在换乘的任何2种交通方式之间的关键路径,建立枢纽内设施不同布局方案的效用损失模型,以此评价和优化枢纽内设施布局方案。
补充资料:2005年关键纳米技术及问题

《技术评论》摘取了5项在2005年中的纳米技术与材料科学方面最重要的先进技术,以及存在的主要问题——其将决定整个领域的未来。
                        
    从太阳中吸取能量
               
    油价的提升和全球变暖的恐惧重新点燃了可替代能源的寻找工作。虽然《技术评论》不断在报道使用核能作为清洁能源的接受度正在增加,但同时也关注到一些领先的纳米技术将为更实用的太阳能利用铺平道路。Konarka of Lowell推出“roll-to-roll”solar cell
technology,就是以含纳米粒子的薄膜制造。且其制造的电池与传统电池效能也不同,它们是用更便宜的工艺制作的。低价且电池的灵活性,使太阳能可在更多场合使用,包括建筑窗户和帐篷、手提包的纤维等。另外,还有利用纳米线获取太阳能的报道,这将比廉价电池的效率更高。
                        
    锂经济
               
    轻质锂电池不适宜聚集在一起用于高能场合,例如无电线钻井和混合汽车。现在,由于计算机模型可确定有希望的新型电池材料,所以今年我们看到了锂离子电池堆用于无电工具,在2006年,其将带来更多应用,并朝着更轻、更强有力的混合汽车前进。此外,锂电池由于不存在氢的供给问题,在未来的汽车工业中将与燃料电池有着激烈竞争。
                        
    自组装设备
               
    纳米技术的梦想是“一罐”合成:组合原始材料,混合,加热,以及纳米部件的工作设备。由于今天的半导体工业中的高温反应,这样的合成不需要更多的能源。还能减少有害溶剂使用,和有废材料的产生。同时,还比较廉价。MIT的Angela Belcher直接进化病毒并发酵,使自组装成为可能。另外,也有希望使用硅藻属作为纳米设备的模板的报道。在2005年12月/2006年1月的技术评论杂志上,还有使用纳米机械组装单分子存储设备的报道。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条