1) NiTi alloy extract
NiTi合金浸提液
2) 317L alloy extract
317合金浸提液
3) NiTi alloy
NiTi合金
1.
Microstructures and properties of laser spot-welded joint of superelastic NiTi alloy wire;
超弹性NiTi合金丝激光点焊接头的组织和性能
2.
Microstructure and corrosion behavior of laser surface re - melted NiTi alloy;
激光重熔NiTi合金表面组织与腐蚀行为
3.
Preparation and characterization of bilayer bioactive film on medical NiTi alloy surface;
医用NiTi合金表面双层生物活性薄膜的制备及表征
4) NiTi alloys
NiTi合金
1.
Surface modification of biomedical NiTi alloys with coldplasma technique;
医用NiTi合金低温等离子体表面改性
2.
The effects of a DC electric field up to 1kV/cm on the deformation behavior of NiTi alloys were determined at constant strain rate of 2.
在600℃和较低应变速率下进行NiTi合金的拉伸实验,研究了拉伸过程中外加电场(E=1 kV/cm)对其高温变形行为的影响。
3.
The characterization of PEG-like structures grafted on NiTi alloys surface under oxygen/di(ethylene glycol) methyl cold-plasma-process from electron cyclotron resonance conditions was studies in this paper.
本文研究了氧 二 (乙二醇 )甲醚低温等离子体条件下NiTi合金表面接枝PEG结构及其性质。
5) NiTi alloy belt
NiTi合金带
1.
In this paper,the shape memory alloys(SMA) with special properties-NiTi alloy belts is composed in a component at the location where cracks(or damage)will most probablyemerge,and when matched with a computer monitoring system,the component becomes an intelligent composite component of NiTi alloy belts which can detect cracks automatically and controltleir growth actively.
根据复合工艺的特殊要求，提出了特性能优异的NiTi形状记忆合金薄带经特殊处理以后，将其复合于易产生裂纹（或损伤）的构件内，与微机监控系统相配合，利用NiTi合金带的特殊性能，实现对构件内裂纹的自动探测和控制。
6) NiTi alloy thin film
NiTi合金膜
补充资料：浸提液
分子式：
CAS号：
性质：又称浸提液，抽提液。通常指由生物材料中提取某一生化物质时所采用的“固液萃取”工艺过程中“固液分离”后获得的液体(或溶剂)部分，即萃取液。广义上有时也指化学工业、冶金、制药、食品和原子能等工业中各种过滤液或甩水机流出液，或离心上清液。
CAS号：
性质：又称浸提液，抽提液。通常指由生物材料中提取某一生化物质时所采用的“固液萃取”工艺过程中“固液分离”后获得的液体(或溶剂)部分，即萃取液。广义上有时也指化学工业、冶金、制药、食品和原子能等工业中各种过滤液或甩水机流出液，或离心上清液。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条