1) coating film thickness
镀膜厚度
1.
On the basis of the experience and test comparison working for many years,the authors summarize the optimal coating method and coating film thickness for the non electric conductive microfossils,such as Radiolaria,diatoms, tentaculites ,foraminifera,Ostracoda,Charophyta,conodont and sponge spicule.
根据多年的工作经验和试验对比，总结出了非导电微体化石——放射虫、硅藻、竹节石、有孔虫、介形虫、轮藻、牙形石、海绵骨针等的最佳镀膜方法和最佳镀膜厚度。
2) deposition thickness
积附厚度<真空镀膜>
3) plating thickness
镀层厚度
1.
Waveguide product plating thickness can be confirmed through surface effect depth.
当镀层厚度偏厚时,会使成本增加和带来资源的浪费。
2.
A mathematical model of the relationship between intensity and plating thickness has been advanced, as well as in the same model, U M and U L ray are selected to measure thin and thick sample, respectively.
讨论了初级X射线与铝镀层和铀基体物质、铀的特征线与铝镀层之间的相互作用、铀基体的放射性对测量铝厚度的影响程度 ,提出强度与镀层厚度关系的数学模型 ,以及在同一数学模型中 ,根据铝镀层厚度的实际情况分别选用铀的M和L线测定薄样和厚样。
3.
The temperature sensitivity formula of nickel clad FBG is discussed,and the relation between the temperature sensitivity and the plating thickness of nickel clad fiber bragg grating is analyzed in theory and verified by experiment.
讨论了化学镀镍FBG的温度灵敏度公式,理论分析并用实验证明了镀镍层厚度与温度灵敏度的关系,理论分析得到化学镀层厚度分别为2。
4) Coating thickness
镀层厚度
1.
Approximate calculating formula of the coating thickness is inferred.
讨论钢丝镀层重量３种表示方法之间的关系，并导出镀层厚度的近似计算公式。
2.
In order to enhance their corrosion-proof capability and improve maintainability and service life, the author makes a suggestion of reasonable selection of the coating thickness and thread fit clearance while ensuring the thread attachment strength, based on the re.
为提高飞机螺纹连接件的抗腐蚀能力 ,改善飞机的维修性能和提高飞机的使用寿命 ,本文根据镀层厚度与螺纹配合间隙的关系 ,结合国内外相应标准的规定 ,在保证螺纹连接强度的情况下 ,对如何合理选择镀层厚度和螺纹配合间隙来提高抗腐蚀能力的问题做了论
3.
In order to perform real-time inspection and control of the coating thickness during auto-brush-electroplating,a virtual inspection and control system,which examines the coating thickness based on Faladay(s law of electrolysis and Eddy -current effect,was developed with Labview software platform.
为实现自动化纳米复合电刷镀过程中镀层厚度的实时监控,利用Labview软件平台,基于法拉第电解定律和涡流效应,研发了纳米复合电刷镀镀层厚度虚拟监控系统,并对纳米复合电刷镀过程中纳米复合刷镀层厚度进行了监控实验。
5) coating thickness
镀层厚度、镀[涂、包]层厚度
6) Thickness of coated copper layer
镀铜层厚度
补充资料：湿膜厚度计
分子式：
CAS号：
性质：在漆膜制备后立即进行测量厚度的仪器。有轮规（wheel tube）和梳规（comb tube）。轮规由三个圆盘组成，外侧两个圆盘在某一半径处相切，该处的间隙为零，在相反关径处，间隔最大，外侧有刻度，指示不同间隙的读数；梳规为一正方形或矩形金属板或塑料片，在其4边都刻着带不同读数的齿，各齿距水平面有依次递升的不同间隙。湿膜厚度为沾湿的轮或齿的读数。
CAS号：
性质：在漆膜制备后立即进行测量厚度的仪器。有轮规（wheel tube）和梳规（comb tube）。轮规由三个圆盘组成，外侧两个圆盘在某一半径处相切，该处的间隙为零，在相反关径处，间隔最大，外侧有刻度，指示不同间隙的读数；梳规为一正方形或矩形金属板或塑料片，在其4边都刻着带不同读数的齿，各齿距水平面有依次递升的不同间隙。湿膜厚度为沾湿的轮或齿的读数。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条