说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> Mises应力最大值
1)  the maximum of Mises stress
Mises应力最大值
1.
It is verified that adopting the maximum of Mises stress on all of the nodes of the element as the stress constraint is reasonable.
对结构优化中常用的二维连续体单元进行讨论,论证了取诸节点处Mises应力最大值作为应力约束的合理性。
2)  maximum Mises stress
最大Mises应力
1.
A mixed-mode fracture criterion based on maximum Mises stress on radial plane under three-dimensional stress condition;
考虑三向应力效应的最大Mises应力复合断裂判据
2.
With ANSYS software and adopting three-dimensional finite element method(FEM),the study is performed on the maximum Mises stress of nozzle with reinforcement pad,which has penetrated cracks in its shoulder and effected by internal pressure.
研究表明,在弹性范围内,此结构的最大Mises应力与内压呈线性关系,且结构最大Mises应力的位置为接管腹部下方容器和补强圈的焊接处。
3)  fatigue on the stress value of Von-Mises
Von-Mises应力值疲劳
4)  the peak Mises stress
Von Mises应力峰值
5)  Von Mises stress
Von Mises应力
1.
The largest Von Mises stress influences of various structural parameters were searched.
本文建立了金刚石圆锯片的切削力分析模型,采用有限元的方法对金刚石圆锯片的水槽结构,以水槽的倾斜角度(水槽与径向之间的夹角)、水槽的底孔半径、水槽左、右侧边的角度结构参数为试验因素,进行静力分析计算,探讨各种结构参数对锯片最大Von Mises应力的影响。
2.
The maximum Von Mises stress inside the casing will increase gradually when the circumferential angle of the void changes from 20° to 80°,and the maximum Von Mises stress inside the casing will decrease gradually when the circumferential angle of the void chan.
分析结果表明:(1)地层中空隙的存在会降低套管的抗挤强度,空隙周向角度从20°变化到80°,套管内最大Von Mises应力逐渐增大,空隙周向角度从80°变化到180°,套管内最大Von Mises应力逐渐减小;(2)空隙压力的降低,会使套管内最大Von Mises应力增大,当空隙周向尺寸足够大时,空隙压力pv下降会导致空隙内地层边界与水泥环接触,从而减缓套管内最大Von Mises应力增大的幅度。
3.
The maximum Von Mises stresses in jaw bone and sensitivity to D and L were evaluated.
0mm,观察D和L变化对颌骨Von Mises应力峰值的影响,同时进行颌骨VonMises应力峰值对变量的敏感度分析。
6)  Von-Mises stress
Von-Mises应力
补充资料:最大的最大收益值准则
分子式:
CAS号:

性质: 也称最大的最大收益值准则。不确定型决策准则之一。其方法是:首先找出各方案的最大收益值,然后选择这些最大收益值中最大者所在的方案作为最满意方案。这个准则采取乐观主义态度,把方案最大收益值(或最小损失值)的自然状态,作为必然出现的自然状态采看待,从而把不确定型决策问题化为确定性决策问题来处理。选择最大收益值中最大的方案(对损失值来说就是选择最小损失值中最小的方案)作为最满意的方案,即取“最有利中之最有利”方案,所以亦称为“乐观的决策准则”。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条