2) particulate reinforced
颗粒增强
1.
Study on SiC particulate reinforced AZ91 magnesium matrix composite;
SiC颗粒增强AZ91镁基复合材料的研究
2.
Study on particulate reinforced iron-matrix coating produced by plasma jet surface metallurgy;
等离子束表面冶金原位颗粒增强铁基涂层的研究
3.
Melt-stirred composing in semi-solid for Al_2O_3 particulate reinforced aluminium matrix composites;
Al_2O_3颗粒增强铝基复合材料的半固态搅熔复合
3) particle reinforcement
颗粒增强
1.
A model was established to examine the influence of particle reinforcement on the yield strength of aluminum matrix composites,which was based on the equivalent inclusion approach of ASHALBY and assumption that the reinforcement fracture follow the WEIBULL statistics.
通过ASHALBY等效夹杂理论分析复合材料受载时作用在增强体上的应力,并假设增强体的断裂符合WEIBULL分布,在综合考虑复合材料各种强化机制的基础上引入增强体断裂对材料屈服强度的影响,建立了一个复合材料的屈服强度模型,将其应用于SiC颗粒增强Al基复合材料,发现在屈服状态下复合材料的颗粒断裂分数随着增强体的体积含量和粒度的增加而增加,但增强体粒度变化对颗粒断裂影响更大。
4) particle reinforced
颗粒增强
1.
Preparation methods of particle reinforced surface metal matrix composites;
外加颗粒增强表层复合材料制备方法
2.
Elastoplastic properties of particle reinforced titanium matrix composites;
颗粒增强钛基复合材料的弹塑性能研究
3.
Microstructure of particle reinforced Ni-base alloy composite coating by laser cladding;
激光熔覆制备颗粒增强Ni基复合涂层的组织结构
5) particle reinforce
颗粒增强
1.
The recent research status of brazing technology for SiC particle reinforced aluminium matrix composites are summarized and evaluated.
综述了近年来国内外关于碳化硅颗粒增强铝基复合材料各种钎焊连接技术的研究现状,总结提出了其钎焊过程中所存在的问题,并对其今后钎焊研究的发展方向作了展望。
2.
The particle reinforced Cu-matrix composites can not only keep excellent electrical conductivity and thermal conductivity, but also increase the strength and wear-resistance of the composites, proven to be a composite with bright future for development.
颗粒增强铜基复合材料在基本保持金属铜优良导电和导热性能的基础上大大提高了铜基复合材料的强度和耐磨性,是一种具有良好发展前景的复合材料。
6) reinforced pellets
增强粒材
1.
Study of temperature effects on hemp fiber reinforced pellets performance;
温度对大麻纤维增强粒材性能影响的研究
补充资料：初级粒子和原级粒子
分子式：
CAS号：
性质：又称初级粒子和原级粒子。利用各种化学反应方法得到的最初粒子(晶粒)。一次粒子的大小约为0.005～1μm，比筛分的极限小得多，在介质中有相当高的稳定性。
CAS号：
性质：又称初级粒子和原级粒子。利用各种化学反应方法得到的最初粒子(晶粒)。一次粒子的大小约为0.005～1μm，比筛分的极限小得多，在介质中有相当高的稳定性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条