1) particle reinforcing
微粒增强
1.
Recently the way to improve the mechanical properties and heat-resistant properties to for rigid foam plastic are fiber reinforcing, particle and nano-particle reinforcing, polymer alloy foam, and new type of foam plastics.
近年国内为提高硬质泡沫塑料的力学性能和耐热性能 ,采取的主要方法有 :纤维增强、微粒和纳米微粒增强 ,以及制备聚合物合金泡沫塑料、新型泡沫塑料等。
2) particulate rein-forced composites
微粒增强复合材料
3) EPSO
增强型微粒群优化
1.
An enhanced particle swarm optimization algorithm (EPSO) is proposed based on the analysis of PSO.
对微粒群优化算法(PSO)进行分析,提出一种增强型微粒群优化算法(EPSO)。
4) particulate reinforced
颗粒增强
1.
Study on SiC particulate reinforced AZ91 magnesium matrix composite;
SiC颗粒增强AZ91镁基复合材料的研究
2.
Study on particulate reinforced iron-matrix coating produced by plasma jet surface metallurgy;
等离子束表面冶金原位颗粒增强铁基涂层的研究
3.
Melt-stirred composing in semi-solid for Al_2O_3 particulate reinforced aluminium matrix composites;
Al_2O_3颗粒增强铝基复合材料的半固态搅熔复合
5) particle reinforcement
颗粒增强
1.
A model was established to examine the influence of particle reinforcement on the yield strength of aluminum matrix composites,which was based on the equivalent inclusion approach of ASHALBY and assumption that the reinforcement fracture follow the WEIBULL statistics.
通过ASHALBY等效夹杂理论分析复合材料受载时作用在增强体上的应力,并假设增强体的断裂符合WEIBULL分布,在综合考虑复合材料各种强化机制的基础上引入增强体断裂对材料屈服强度的影响,建立了一个复合材料的屈服强度模型,将其应用于SiC颗粒增强Al基复合材料,发现在屈服状态下复合材料的颗粒断裂分数随着增强体的体积含量和粒度的增加而增加,但增强体粒度变化对颗粒断裂影响更大。
6) particle reinforced
颗粒增强
1.
Preparation methods of particle reinforced surface metal matrix composites;
外加颗粒增强表层复合材料制备方法
2.
Elastoplastic properties of particle reinforced titanium matrix composites;
颗粒增强钛基复合材料的弹塑性能研究
3.
Microstructure of particle reinforced Ni-base alloy composite coating by laser cladding;
激光熔覆制备颗粒增强Ni基复合涂层的组织结构
补充资料：MH微粒硬质造牙材料
分子式：
CAS号：
性质：以甲基丙烯酸甲酯-苯乙烯共聚物为基质，以微粒二氧化硅(1000目以上)作填料，用有机硅烷处理后配制而成。它既能保持陶瓷牙的优点，又兼有塑料牙的长处，其力学性能又接近天然牙，是硬质复合的新型造牙材料。
CAS号：
性质：以甲基丙烯酸甲酯-苯乙烯共聚物为基质，以微粒二氧化硅(1000目以上)作填料，用有机硅烷处理后配制而成。它既能保持陶瓷牙的优点，又兼有塑料牙的长处，其力学性能又接近天然牙，是硬质复合的新型造牙材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条