1)  running thermal efficiency
运行热效率
2)  running
运行
1.
Analysis and summary on the running of NIRO two-stage fluidized bed dryer;
NIRO两段流化床干燥器运行情况分析和总结
2.
Analysis on running data of Sino-Japanese cooperated 200 kW PAFC power station in Panyu;
中日合作番禺200kW磷酸燃料电池运行数据分析
3.
Start-up summary and running analysis of 1.2 Mt/a diesel hydrofining unit of Lanzhou Petrochemical Company;
兰州石化1.2Mt/a柴油加氢装置开车及运行分析
3)  operation
运行
1.
Design and operation of Daye's waste acid treatment plant;
大冶污酸处理装置的设计和运行
2.
Summary on F-4112 membrane operation;
F-4112膜运行总结
3.
Adjustment and Control of Activated Sludge System Operation(Ⅰ);
活性污泥系统运行的调节与控制(上)
4)  operating
运行
1.
Application of oil-fired boiler into Coal-Water-Slurry-fired one in the Oil Refinery and studies on several operating questions;
某化工项目炼油厂65T/h燃油锅炉改烧水煤浆的运行情况及相关问题的探讨
2.
Economic Operating of Medium and Small Size Three Phase Induction Motors;
谈中小型三相异步电动机经济运行
3.
How enhances the air compressor equipment the operating efficiency,to saves the electrical energy and reduces the production cost to have the count for much significance.
如何提高空压机设备的运行效率,对节约电能和降低生产成本有着非常重要的意义。
5)  run
运行
1.
Depurating water quality of bottled drinking natural mineral water and running manage;
瓶装饮用天然矿泉水水质净化及运行管理
2.
The brief summary of industrial gas turbine running and overhauling;
工业用燃气轮机运行和检修
3.
This paper introduces the limit and run management method of unheated gathering and transportation in Daqing Oilfield and pointed out the direction of future research.
介绍大庆油田不加热集技术界限及运行管理方法现状,并指出了今后的研究方向。
6)  function
运行
1.
Analysis on the Over-water Lifesaving System and Its Functional Law;
游泳救生系统及其运行分析
2.
The establish and function of the Land Reserving System;
土地储备制度的建立与运行
3.
Analyzed is the functioning effect of the new system and the scientific solutions to the existing problems are advanced finally.
探讨了农业社会化服务体系股份合作制改造的意义、主要类型及存在的问题,分析了新体制下的运行效应,最后就存在问题提出了科学的对
参考词条
补充资料:冶金炉热平衡和热效率
      冶金炉的热平衡指的是向炉内提供的热量等于被加热物达到工艺要求时所吸收的热量加上各种热损失的总和。热平衡的理论基础是热力学第一定律。分析热平衡的目的是从热能流向图中找出进一步节能的途径。热效率则是被加热物吸收的热量与向炉内提供热量的比值。并用比值的大小评价冶金炉热工作的优劣,希望达到尽可能大的比值。
  
  热损失项目繁多,主要为炉气和冷却水带走的热,炉墙的积热和散热。炉气带走的热最多,而且在热支出的总量中占的份额差别也很大,一般为20~50%;冷却水带走的热也大,如加热炉冷却滑轨的水带走的热量可达全部热损失的15~30%,采用汽化冷却和绝热包扎后可降到6%左右;其他如炉墙积热和散热,炉门溢气和辐射,不完全燃烧等热损失在正常情况下约占热总收入的10~20%。某些间歇式的热处理炉炉墙积热和散热以及料架吸热有时高达热总收入的40%。近年来采取减少热损失的措施有:回收炉气带走的热,对炉内冷却件实行绝热,使炉墙轻型化和加大炉墙的热阻,采用加热新工艺,通过这些可使某些加热炉的热效率达60%以上。目前正设法利用产品所吸收的热以进一步降低总的能耗。根据不同类型和不同效率范围的200座加热炉和150座热处理炉的测定数据所做的研究分析,得出综合热平衡情况见图。从图中可以看出,提高待加工品的热焓,充分利用废气和冷却水的余热,进一步减少炉墙和辐射热损失以及设法利用产品带走的热,将是冶金炉节能的主要途径。
  
  加热炉和热处理炉的热效率一般为15~65%;化铁炉为25~45%;高炉为75~85%;平炉为20~30%。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。