1) fire-resistance expanded polystyrene panel
阻燃型膨胀聚苯板
3) Intumescent flame retardant
膨胀型阻燃
1.
Ammonium polyphosphate(APP)-pentaerythritol(PT)- melamine( M) systems have been chosen as an intumescent flame retardant(IFR),chlorination rubber as matrix resin to prepare flame resistant coating.
以多聚磷酸铵(APP)_季戊四醇(PT)_三聚氰胺(M)为膨胀型阻燃体系(IFR),氯化橡胶为基材树脂,制备阻燃涂料。
2.
The effect of the intumescent flame retardant system on ABS/PA6(80/20) alloys was studied.
以聚磷酸铵(APP)为酸源,利用ABS/PA6合金中PA6为炭源对ABS/PA6合金进行膨胀型阻燃研究,探讨了不同成炭协效剂与APP复配对合金阻燃性能的影响,这些成炭协效剂包括季戊四醇笼状磷酸酯(PEPA),热塑性酚醛树脂(TPPFR),环氧树脂(E-44)和分子筛4A。
4) Intumescent Flame Retardant PP
膨胀型阻燃聚丙烯
1.
Study on Intumescent Flame Retardant PP Reinforced by Nylon;
用尼龙 6(PA6)代替部分季戊四醇 (PT)作成炭剂 ,制得了膨胀型阻燃聚丙烯 (IFR PP) ,讨论了PA6对IFR PP的力学性能、阻燃性能、热稳定性和流变行为的影响。
2.
Study on Intumescent Flame Retardant PP/Nylon/Nano-meter Montmorillonite Blend;
用尼龙 6(PA6)代替季戊四醇 (PT)作为成炭剂组成的膨胀型阻燃聚丙烯 (PP)有熔滴、阻燃效果差的缺点 ,加入纳米蒙脱土 (nano MMT)作为阻燃剂的协效剂后可克服以上缺点。
6) intumescent fire retardant
膨胀型阻燃剂
1.
Polypropylene(PP) was fire retarded with a novel phosphorus,nitrogen and sulfur containing intumescent fire retardant(IFR),1,4-(O,O-diethyl thiophosphoryl imine) benzene (DTPB) which was synthesized by using phosphorus thiochloride,dehydrated alcohol and p-phenylenediamine.
以三氯硫磷、无水乙醇、对苯二胺为原料所合成的新型含磷、硫、氮的膨胀型阻燃剂(IFR),1,4-(O,O-二乙基硫代磷酰亚胺基)苯(DTPB)对聚丙烯(PP)进行阻燃,用热重法(TG)和差示扫描量热法(DSC)对阻燃PP的热性能进行了研究,利用氧指数仪测定了阻燃PP的极限氧指数(LOI)值,当阻燃剂含量为28%,LOI值为37。
2.
The typical system of intumescent fire retardant APP(ammonium polyphosphate) PER(pentaerythritol) was used to retard the combustion of low density polyethylene(LDPE) and the factors which influence the properties and the thermal degraded behaviour of intumescent fire retarded LDPE were discussed.
采用膨胀型阻燃剂—聚磷酸铵和季戊四醇 (APP/PER)体系对低密度聚乙烯 (LDPE)进行阻燃。
3.
The status of intumescent fire retardant developed was summaried by pentaerythritol and its derivatives, and heir the direction of development was prospected.
本文综述了以季戊四醇及其衍生物为炭源研制的膨胀型阻燃剂的发展状况,并对其今后的发展方向进行了展望。
补充资料:阻燃高抗冲聚苯乙烯
分子式:
CAS号:
性质:以高抗冲聚苯乙烯树脂与定量阻燃剂及添加剂在混合器内相混,经双螺杆挤出机共混、造粒、切粒、包装成产品。为白色粒料。具有良好的冲击韧性、尺寸稳定性、阻燃性和高的流动性。拉伸强度32MPa。相对伸长率70%。弯曲强度43MPa。热变形温度86℃。阻燃性UL-94,V-0级。用于电视机壳阻燃后盖,开关盒盖及其他尺寸精度要求高的薄壁壳体、面板、电器元件和电器零部件等。
CAS号:
性质:以高抗冲聚苯乙烯树脂与定量阻燃剂及添加剂在混合器内相混,经双螺杆挤出机共混、造粒、切粒、包装成产品。为白色粒料。具有良好的冲击韧性、尺寸稳定性、阻燃性和高的流动性。拉伸强度32MPa。相对伸长率70%。弯曲强度43MPa。热变形温度86℃。阻燃性UL-94,V-0级。用于电视机壳阻燃后盖,开关盒盖及其他尺寸精度要求高的薄壁壳体、面板、电器元件和电器零部件等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条