1) movable rigid cylindrical inclusion
可移动刚性夹杂
1.
Scattering of SH-wave by a semi-cylindrical hill above a subsurface removable rigid cylindrical inclusion in half-space was studied based on"conjunction".
将整个求解区域分割为两部分,在其中分别构造位移解,通过移动坐标,在“公共边界”上实施“契合”,并同时满足地下可移动刚性夹杂的边界条件,从而建立起求解该问题的无穷代数方程组。
2) removable rigid cylindrical inclusion
可移动圆柱形刚性夹杂
1.
Scattering of SH-waves and ground motion by a shallow-embedded removable rigid cylindrical inclusion;
SH波在浅埋可移动圆柱形刚性夹杂处的散射与地震动
3) removable cylindrical rigid interface inclusion
界面可移动圆柱形刚性夹杂
4) rigid inclusion
刚性夹杂
1.
The shape optimization of a rigid inclusion in an elastic plane under concentrated loads is considered.
当夹杂的弹性模量比基体的弹性模量大得多时,可将其看成刚性夹杂。
5) rigid line inclusions
刚性线夹杂
1.
Composite materials with doubly periodic rigid line inclusions under antiplane shear in an infinite medium are discussed.
研究无限介质中含双周期刚性线夹杂复合材料的反平面问题,其基本胞元含有四条不同长度的刚性线夹杂。
2.
The antiplane problems of collinear rigid line inclusions between dissimilar anisotropic materials are studied.
研究两种各向异性材料焊接界面含共线刚性线夹杂的反平面问题 ,导出了一般问题的公式和几个典型问题的封闭形式解 ,求出了刚性线尖端的应力分布 。
6) rigid line inclusion
刚性线夹杂
1.
The antiplane problem of circular arc rigid line inclusions under antiplane concentrated force and longitudinal shear loading was dealt with.
研究了在反平面集中力和无穷远纵向剪切作用下,不同弹性材料圆形界面上有多条刚性线夹杂的问题· 运用Riemann_Schwarz解析延拓技术与复势函数奇性主部分析方法,首次获得了该问题的一般解答,求出了几种典型情况的封闭解,并给出了刚性线夹杂尖端的应力场分布· 结果表明,在反平面加载的情况下圆形界面刚性线夹杂尖端应力具有平方根奇异性,无奇异性应力振荡;应力场与刚性线夹杂的形状,加载方式和材料性质有关· 退化结果与已有的解答完全吻合·
2.
In this paper, the interaction problem of a rigid line inclusion and an elasticcircular inclusion has beed reduced to solve a normal Cauchy-type singular integral eduation.
本文将刚性线夹杂与弹性圆夹杂的相互作用,归为解一个标准的柯西型奇异积分方程,获得了刚性夹杂端点的应力强度因子及夹杂的界面应力。
3.
Longitndinal shear problems of collinear rigid line inclusions(sometimes called hard crack or inverse crack problems)in anisotropic materials are dealt with.
本文研究各向异性材料中共线刚性线夹杂,(有时称作“硬裂纹”或“反裂纹”问题)的纵向剪切问题。
补充资料:GCr15钢中的大型非金属夹杂物(铝酸盐)×500
GCr15钢中的大型非金属夹杂物(铝酸盐)×500
GCrl5钢中的大型非金属夹杂物(铝酸盐) ×500
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条