1) Nb-Si-N films
Nb-Si-N薄膜
1.
The experimental results indicate that through controlling the SiH_4 partial pressure in the mixed gas,it is convenient to deposit Nb-Si-N films different in silicon contents by m.
结果表明,采用反应磁控溅射技术通过控制混合气体中SiH4分压可以方便地获得不同Si含量的Nb-Si-N薄膜。
2) Ti-Si-N films
Ti-Si-N薄膜
1.
The influence of bombardment energy on the growth and mechanical property is investigated,and the influence of bombardment energy on the growth mechanism of Ti-Si-N films is discussed.
试验结果表明:当轰击能量为700eV时,Ti-Si-N薄膜晶粒直径达到了最小值11nm,此时Ti-Si-N薄膜的硬度相对最高,为33GPa。
3) Cr-Si-N coating
Cr-Si-N薄膜
1.
Cr-Si-N coatings by incorporating several atomic percentage of Si to CrN were prepared,using an arc ion plating method.
利用电弧离子镀方法,在(SCM415)钢基体上制备了Cr-Si-N薄膜。
4) Zr-Si-N films
Zr-Si-N薄膜
1.
Zr-Si-N films were prepared by radio frequency powered reactive magnetron sputtering at different N2 partial pressures.
03PaN2分压条件下,Zr-Si-N薄膜硬度达到22。
6) Si-N-O film
Si-N-O薄膜
1.
Influence of Si-N-O films structure on their hemocompatibility
Si-N-O薄膜结构对薄膜血液相容性的影响
补充资料：Direct Green NB
分子式：
CAS号：
性质：灰色粉末。溶于水、丙酮和溶纤素，微溶于乙醇，不溶于其他有机溶剂。对硝基苯胺重氮化，在酸性介质中与H酸偶合；4,4′-二氨基苯甲酰替苯胺重氮化后先与上述偶合物在碱性介质中偶合，再与苯酚偶合经盐析、过滤、干燥而得。主要用于棉、黏胶、蚕丝的染色和印花。也用于黏/锦及毛/黏胶混纺织物的染色。
CAS号：
性质：灰色粉末。溶于水、丙酮和溶纤素，微溶于乙醇，不溶于其他有机溶剂。对硝基苯胺重氮化，在酸性介质中与H酸偶合；4,4′-二氨基苯甲酰替苯胺重氮化后先与上述偶合物在碱性介质中偶合，再与苯酚偶合经盐析、过滤、干燥而得。主要用于棉、黏胶、蚕丝的染色和印花。也用于黏/锦及毛/黏胶混纺织物的染色。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条