1)  pipelines ball valves
管线球阀
2)  pipeline
管线
1.
Choice and Analysis of the Fracture Failure Probability Model of Pipelines;
管线断裂失效概率模型选取及分析
2.
Research on Motional Regularity of Pig in Oil Pipeline;
输油管线中清管器运行规律研究
3.
Practice of pipeline anticorrosion in Jianghan Oil Region and understanding on improvement of glass steel pipeline;
江汉油区管线防腐实践与玻璃钢管线改进认识
3)  pipe line
管线
1.
Data Process of Pipe Line Finish Construction Survey;
管线竣工测量的数据处理
2.
This article presents the types and quantities of the pipe lines in UHDE AMV plant and presents in detail the welding of special steel pipe X20CrMoV121 first adopted in large scale fertilizer industry in China.
简要介绍UHDE-AMV合成氨装置中管线的数量、种类,并详细介绍了在我国大化肥行业中首次采用的特种钢管——X20CrMoV121的焊
4)  pipe
管线
1.
Vibrating Reason Analyzing and Treatment of the Furnace Pipe on FCC Diesel Oil Hydrogenation Unit;
催柴加氢装置加热炉管线振动原因及处理
2.
Production Practice of EBT EAF-LF(VD)-HCC Process for Pipe Clean Steel at Henyang Steel Tube;
衡钢管线用洁净钢EBT EAF-LF(VD)-HCC工艺生产实践
3.
Research and Design of Underground Saps Pipe Integration Optimization;
地下坑道综合管线优化方法研究与设计
5)  pipelines
管线
1.
Then it analyzes the pipelines corrosion, strength and stiffness effects under the pressure hazard factor of the long distance pipelines.
以输油管道设计规范为依据,计算管道目前状态的轴向应力、环向应力和径向变形量,分析管线腐蚀、占压危害因素对长输管道的强度、刚度造成的影响,从量化的角度评价湛茂原油管线被公路、建筑物占压后运行过程中存在的风险,并提出处理办法。
2.
Offshore pipelines are indispensable structures during the marine petroleum exploitation.
在近海管线的铺设、安装、使用过程中有多种作业状态 :在位、悬跨、挖沟、提吊、铺管等。
3.
The oilfield now claims over 100 platforms and 200km submarine pipelines and cables.
胜利埕岛海上油田自1993年正式开发至今,目前已建成平台近百座,海底管线、海底电缆各近200km。
6)  piping
管线
1.
Vibration Analysis and Antivibration Reinforcement of Spray Colloidal Liquid Pump Piping;
喷胶泵管线振动分析及防振加固
2.
The piping of p215a colloial liquid pump of hot ductility butyl benzene elastomer ruber shop occured vibration during operation.
热塑丁苯弹性体橡胶 ( SBS)车间 P2 1 5a胶液泵管线运行过程中发生振动 ,尤其是出料结束时管线振动相当严重 ,最大振幅达 979μm。
3.
s: The corrosion of the outlet piping of high-pressure air cooler of the hydrotreating unit and the outlet piping of the overhead air cooler of amine regenerator of the low-pressure acid gas desulfurizer of the heavy oil hydroprocessing unit was analyzed.
文章对胜利炼油厂蜡油加氢装置的临氢高压空冷器出口管线及重油加氢装置低压酸性气体脱硫系统胺液再生塔顶空冷器出口管线的腐蚀进行了分析 ,指出H2 S含量、介质流速、温度及材质是影响腐蚀的主要因素 ,并提出控制介质流速在 0 。
参考词条
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀
减压阀
顺序阀
控制油路的特点
通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0
通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定
直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力
出油口情况
出油口与油箱相连
出油口与减压回路相连
出油口与工作回路相连
泄漏形式
内泄式
外泄式
内泄式
进油口状态及压力值
常态
常闭(原始状态)
常开(原始状态)
常闭(原始状态)
工作状态
进出油口相通,进油口压力为调整压力
进油口压力低于出油口压力,出油口压力稳定在调定值上
进出油口相通,进油口压力允许继续升高
联接方式
并联
串联
实现顺序动作式串联作卸荷阀用时并联
功用
定压、溢流或安全作用限压、稳压、保压
减压、稳压
不控制系统的压力,只利用系统的压力变化控制油路的通断
进油腔压力p1控制阀芯移动
出油腔压力p2控制阀芯移动
进油腔压力p1控制阀芯移动
说明:补充资料仅用于学习参考,请勿用于其它任何用途。