1) line pipe
管线钢管
1.
This requires line pipe materials to have higher strength with properties suitable for the environment,such as high deformability or sour gas resistance.
天然气管线的敷设地域正在向遥远地区和环境状况严峻的地区扩展,这就要求管线钢管的材料必须具有高强度和适应环境要求的各种性能,如高可变形性和耐酸性气体腐蚀等。
2.
Through the corrosion dent pile weld test on line pipe,hardness and distance from weld fine crystal position to sample back is applied to predict HIC and arc burn.
通过对管线钢管腐蚀坑堆焊工艺试验,采用测量焊缝金相细晶区位置到试样背面的距离和硬度值,来预测是否有烧穿和氢致裂纹产生,从而选择合理的管道腐蚀坑堆焊工艺参数,并对管道腐蚀坑焊接补板的焊缝距离提出了技术要求。
3.
A detailed comparative analysis is made of the technical standards for oil and gas line pipes widely used in and outside China today.
对目前国际、国内普遍使用的油气输送钢管技术标准进行了详细的对比分析,剖析了我国管线钢管技术标准应用中存在的问题,对我国管线钢管标准化工作提出了思路和建议。
3) X70 pipeline steel
X70管线钢
1.
Metallurgical microstructure and fine structure in local brittle zone of in-service welding of X70 pipeline steel;
X70管线钢在役焊接局部脆化区的组织及精细结构
2.
Cathodic polarization behavior of an X70 pipeline steel crevice in solution containing Cl~- and SO_4~(2-);
含Cl~-,SO_4~(2-)溶液中X70管线钢缝隙的阴极极化行为
3.
Static-recrystallization behavior of hot deformation austenite in X70 pipeline steel;
X70管线钢热变形奥氏体的静态再结晶行为
4) X80 pipeline steel
X80管线钢
1.
Study of fracture toughness of X80 pipeline steel after electrochemical hydrogen charging;
X80管线钢电化学充氢后的断裂特性研究
2.
CO_3~(2-)-HCO_3~- stress corrosion test of welded joint for X80 pipeline steel;
CO_3~(2-)-HCO_3~-溶液中X80管线钢焊接接头的应力腐蚀开裂分析
3.
Development of gas metal arc welding wire for X80 pipeline steel;
X80管线钢气体保护焊用焊丝的研制
5) line pipe steel
管线钢
1.
The development course and research direction of the line pipe steel are introduced.
介绍了管线钢的发展过程及研究方向,论述了管线钢的冶炼、轧制技术及质量控制和性能控制要点,提出了开发管线钢应该注意解决的问题。
2.
The development of line pipe steel in Baosteel during the past 15 years is reviewed.
回顾了过去 15年间宝钢管线钢的发展。
3.
5)of!X70 line pipe steel for Shaanjing 2nd pipeline project.
通过对陕京二线管道工程用X70级管线钢规定总伸长应力值 (Rt0。
6) X60 pipeline steel
X60管线钢
1.
Development of X60 Pipeline Steel by 150t EAF-LF-CSP Process at Zhujiang Steel;
珠钢150t EAF-LF-CSP工艺X60管线钢的开发
2.
Domestic X60 pipeline steel was used in natural gas parallel transporting pipeline form Sebei to Ge'ermu engineering.
针对涩北至格尔木天然气管道复线建设中采用的X60管线钢,根据试验,分析了常温与低温焊接时层间温度变化对管口焊接质量的影响,并指出了防止涩格天然气管道焊接产生冷裂纹的工艺措施。
3.
The effects of deformation temperature in ferrite and austenite zones,stress rate and cooling rate on the mechanical properties of X60 pipeline steel were investigated by adjusting austenite-ferrite-repeating deformation parameters.
通过调整奥氏体-铁素体区循环形变参数,研究了铁素体区变形温度、奥氏体区变形温度、变形速率、冷却速度对X60管线钢力学性能的影响规律。
补充资料：宝鸡石油钢管厂大口径薄壁钢管的φ508排辊成形机组
宝鸡石油钢管厂大口径薄壁钢管的φ508排辊成形机组
宝鸡石油钢管厂大口径薄壁钢管的中508排辊成形机组
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条