1) X120 Pipeline Steel
X120管线钢
1.
Experiment of Deoxidation and Desulphurization for X120 Pipeline Steel Melting by Vacuum Induction Furnace;
真空感应炉冶炼X120管线钢脱氧和脱硫试验
2) X100/X120 pipeline steel
X100/X120级管线钢
1.
,pipeline steel with high deformability for unstable geological region or deep sea environment according strain design principle,the anti-erosion pipeline steel for slurry pipe line,the X100/X120 pipeline steel for long distance natural gas delivery,the new welding material and technique for X100/X120 pipeline steel welding and counte.
鉴于管道工业将面临建设输送原油、成品油、粉煤浆、天然气等多种形式管线的高潮,对输送管线用钢发展前沿问题,如根据应变设计(strain design)原则在地质状况不稳定地区或深海管线用高抗变形管线钢;输送粉煤浆管线用抗冲蚀(anti-erosion)管线钢;长距离输送天然气管线用X100/X120级管线钢;能够大幅度提高厚壁管线钢管环焊热影响区韧性的含氧化钛质点管线钢;用于X100/X120级管线钢的新型高强度焊接材料以及防止高压输气管线发展延性断裂等问题做了综合论述。
3) grade X120
X120钢级
1.
The recent development of grade X120 high strength pipeline steel offers opportunity of reducing total cost 5%~15% to long distance gas transmission pipeline for natural gas producer and further decrease the price of transmission natural gas to the market.
介绍了X120钢级发展方案的概况,包括大规模的试验和环缝焊接,同时讨论了X120级管线钢实际应用的方案,在这些方案中管道承压较高,管径较小,最终工程总造价可节约5%~15%。
4) X60～X120 steel grade
X60～X120钢级
5) X120 steel plate
X120钢级钢板
1.
The study focuses on such aspects as change of the mechanical properties of the X120 steel plate, the forming characteristics, weldability and softening of the heat af- fected zone(HAZ)of JCOE, the comparative testing with rectangular and round tensile test pieces and the influ- ences by different welding material proportions and welding thermal inp.
研究了X120钢级钢板力学性能的变化、JCOE成型特点、焊接性、热影响区的软化、矩形和圆棒拉伸试样的对比试验以及不同焊接材料匹配、焊接热输入量对焊接接头的硬度、强度和韧性的影响;与X100钢级进行了对比分析。
6) line pipe
管线钢管
1.
This requires line pipe materials to have higher strength with properties suitable for the environment,such as high deformability or sour gas resistance.
天然气管线的敷设地域正在向遥远地区和环境状况严峻的地区扩展,这就要求管线钢管的材料必须具有高强度和适应环境要求的各种性能,如高可变形性和耐酸性气体腐蚀等。
2.
Through the corrosion dent pile weld test on line pipe,hardness and distance from weld fine crystal position to sample back is applied to predict HIC and arc burn.
通过对管线钢管腐蚀坑堆焊工艺试验,采用测量焊缝金相细晶区位置到试样背面的距离和硬度值,来预测是否有烧穿和氢致裂纹产生,从而选择合理的管道腐蚀坑堆焊工艺参数,并对管道腐蚀坑焊接补板的焊缝距离提出了技术要求。
3.
A detailed comparative analysis is made of the technical standards for oil and gas line pipes widely used in and outside China today.
对目前国际、国内普遍使用的油气输送钢管技术标准进行了详细的对比分析,剖析了我国管线钢管技术标准应用中存在的问题,对我国管线钢管标准化工作提出了思路和建议。
补充资料：120film
分子式：
CAS号：
性质：可拍摄&帧画幅，胶卷全长815mm，6.15cm宽。其后，虽几经修改，一直被国际照相界沿用至今。目前，120胶卷宽度为6.15cm，一卷胶卷可拍6cm×4.5cm画面16张，6cm×6cm画面12张，6cm×7cm画面10张。
CAS号：
性质：可拍摄&帧画幅，胶卷全长815mm，6.15cm宽。其后，虽几经修改，一直被国际照相界沿用至今。目前，120胶卷宽度为6.15cm，一卷胶卷可拍6cm×4.5cm画面16张，6cm×6cm画面12张，6cm×7cm画面10张。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条